LP3856ET-2.5/NOPB Texas Instruments component image

LP3856ET-2.5/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 2.5V 3A TO220-5

Listed in PMIC - Voltage Regulators - Linear

1,303 pcs in stock ships same day before 6pm

from $3.9053

Quantity Unit Price
1 - 134 $3.9273
135+ $3.9053 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP3856ET-2.5/NOPB?

LP3856ET-2-5-NOPB is a ic reg linear 2.5v 3a to220-5, featuring the TO-220-5 Formed Leads package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

24 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3856ES-5.0/NOPB IC REG LIN 5V 3A DDPAK/TO263-5 825 $6.4000 In Stock
LP3856ET-5.0/NOPB IC REG LINEAR 5V 3A TO220-5 981 $5.3400 In Stock
LP3853ET-5.0/NOPB IC REG LINEAR 5V 3A TO220-5 996 $5.2830 In Stock
LP3853ESX-2.5/NOPB IC REG LIN 2.5V 3A DDPAK/TO263-5 747 $7.0600 In Stock
LP3853ES-2.5 IC REG LIN 2.5V 3A DDPAK/TO263-5 631 $8.4529 In Stock
LP3856ESX-2.5/NOPB IC REG LIN 2.5V 3A DDPAK/TO263-5 972 $5.3400 In Stock
LP3853ES-5.0/NOPB IC REG LIN 5V 3A DDPAK/TO263-5 632 $8.4800 In Stock
LP3856ET-3.3/NOPB IC REG LINEAR 3.3V 3A TO220-5 1,316 $3.9273 In Stock
LP3853ET-2.5/NOPB IC REG LINEAR 2.5V 3A TO220-5 976 $5.2830 In Stock
LP3856ESX-5.0/NOPB IC REG LIN 5V 3A DDPAK/TO263-5 979 $5.3400 In Stock
+ 14 more variants in stock — browse the full category

Technical Parameters

LP3856ET-2.5/NOPB Specifications

Series -
Package Tube
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 7V
Voltage - Output (Min/Fixed) 2.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.6V @ 3A
Current - Output 3A
Current - Quiescent (Iq) 4 mA
Current - Supply (Max) 10 mA
PSRR 73dB ~ 57dB (120Hz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case TO-220-5 Formed Leads
Supplier Device Package TO-220-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP3856ET-2.5/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.