LP2985ITPX-1.8/NOPB Texas Instruments component image

LP2985ITPX-1.8/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LINEAR 1.8V 150MA 5DSBGA

Listed in PMIC - Voltage Regulators - Linear

1,487 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP2985ITPX-1.8/NOPB?

LP2985ITPX-1-8-NOPB is a ic reg linear 1.8v 150ma 5dsbga, featuring the 5-UFBGA, DSBGA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

27 variants of this series in stock
Part Number Description Stock Unit Price Status
LP3871EMP-2.5 IC REG LIN 2.5V 800MA SOT223-5 653 RFQ In Stock
LP3874ES-5.0/NOPB IC REG LIN 5V 800MA DDPAK/TO263 3,166 RFQ In Stock
LP3874ET-3.3/NOPB IC REG LINEAR 3.3V 800MA TO220-5 4,505 RFQ In Stock
LP3874ET-5.0/NOPB IC REG LINEAR 5V 800MA TO220-5 2,791 RFQ In Stock
LP3871ET-5.0/NOPB IC REG LINEAR 5V 800MA TO220-5 6,528 $0.7700 In Stock
LP3874ET-2.5/NOPB IC REG LINEAR 2.5V 800MA TO220-5 2,493 RFQ In Stock
LP3874EMP-1.8 IC REG LIN 1.8V 800MA SOT223-5 1,095 RFQ In Stock
LP3871ET-1.8/NOPB IC REG LINEAR 1.8V 800MA TO220-5 693 RFQ In Stock
LP2985ITPX-2.5 IC REG LINEAR 2.5V 150MA 5DSBGA 975 RFQ In Stock
LP3871EMP-3.3 IC REG LIN 3.3V 800MA SOT223-5 1,162 RFQ In Stock
+ 17 more variants in stock — browse the full category

Technical Parameters

LP2985ITPX-1.8/NOPB Specifications

Series -
Package Bulk
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) 1.8V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.58V @ 150mA
Current - Output 150mA
Current - Quiescent (Iq) 95 µA
Current - Supply (Max) 2.5 mA
PSRR 45dB (1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 5-UFBGA, DSBGA
Supplier Device Package 5-DSBGA

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LP2985ITPX-1.8/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.