LNK615DG Power Integrations component image

LNK615DG

In Stock

Power Integrations logo Power Integrations · franchised distributor

IC OFFLINE SWIT CV/CC HV 8SOIC

Listed in PMIC - AC DC Converters, Offline Switchers

1,702 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LNK615DG?

LNK615DG is a ic offline swit cv/cc hv 8soic, featuring the 8-SOIC (0.154", 3.90mm Width), 7 Leads package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Power Integrations Series Variants in Stock

30 variants of this series in stock
Part Number Description Stock Unit Price Status
LNK616GG IC OFFLINE SWIT CV/CC HV 8SOIC 680 RFQ In Stock
LNK605DG-TL IC OFFLINE SWIT CV/CC HV 8SOIC 7,186 $0.7000 In Stock
LNK613PG IC OFFLINE SWIT OTP CV/CC 8DIP 6,976 $0.7200 In Stock
LNK615PG IC OFFLINE SWIT OTP CV/CC 8DIP 6,450 $0.7800 In Stock
LNK606PG IC OFFLINE SWIT OTP CV/CC 8DIP 4,667 $1.0800 In Stock
LNK603DG IC OFFLINE SWIT CV/CC HV 8SOIC 5,604 $0.9000 In Stock
LNK613DG IC OFFLINE SWIT CV/CC HV 8SOIC 5,605 $0.9000 In Stock
LNK604DG IC OFFLINE SWIT CV/CC HV 8SOIC 5,350 $0.9400 In Stock
LNK606GG IC OFFLINE SWIT CV/CC HV 8SOIC 1,691 RFQ In Stock
LNK603DG-TL IC OFFLINE SWIT CV/CC HV 8SOIC 7,281 $0.6900 In Stock
+ 20 more variants in stock — browse the full category

Technical Parameters

LNK615DG Specifications

Series LinkSwitch®-II
Package Tube
Part Status Discontinued at Digi-Key
Output Isolation Isolated
Internal Switch(s) Yes
Voltage - Breakdown 700V
Topology Flyback
Voltage - Start Up -
Voltage - Supply (Vcc/Vdd) -
Duty Cycle 55%
Frequency - Switching Up to 85kHz
Power (Watts) 5.1 W
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Control Features -
Operating Temperature -40°C ~ 150°C (TJ)
Package / Case 8-SOIC (0.154", 3.90mm Width), 7 Leads
Supplier Device Package SO-8C
Mounting Type Surface Mount

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Power Integrations Parts in Stock

Request a Quote

Need LNK615DG or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.