LM5030SD/NOPB Texas Instruments component image

LM5030SD/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG CTRLR MULT TOPOLOGY 10SON

Listed in PMIC - Voltage Regulators - DC DC Switching Controllers

1,876 pcs in stock ships same day before 6pm

from $1.1323

Quantity Unit Price
1 - 999 $2.7200
1,000 - 1,999 $1.2630
2,000 - 4,999 $1.1759
5,000+ $1.1323 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LM5030SD/NOPB?

LM5030SD-NOPB is a ic reg ctrlr mult topology 10son, featuring the 10-WDFN Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
LM5030MM/NOPB IC REG CTRLR MULT TOP 10MSOP 1,873 $2.7200 In Stock
LM5030SDX IC REG CTRLR MULT TOPOLOGY 10SON 2,718 RFQ In Stock
LM5030MMX IC REG CTRLR MULT TOP 10MSOP 1,705 RFQ In Stock
LM5030MMX/NOPB IC REG CTRLR MULT TOP 10MSOP 1,870 $2.7200 In Stock
LM5030SDX/NOPB IC REG CTRLR MULT TOPOLOGY 10SON 2,982 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LM5030SD/NOPB Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Type Transistor Driver
Function Step-Up/Step-Down
Output Configuration Positive, Isolation Capable
Topology Full-Bridge, Half-Bridge, Push-Pull
Number of Outputs 2
Output Phases 1
Voltage - Supply (Vcc/Vdd) 14V ~ 90V
Frequency - Switching 200kHz, 600kHz
Duty Cycle (Max) 50%
Synchronous Rectifier No
Clock Sync No
Serial Interfaces -
Control Features Frequency Control, Soft Start
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 10-WDFN Exposed Pad
Supplier Device Package 10-WSON (4x4)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
LM5033SDX/NOPB IC REG CTRLR PUSH-PULL 10WSON 4,892 $1.0307 97%
LM5033SD/NOPB LM5033 100V PUSH-PULL VOLTAGE MO 4,542 $1.1100 97%
LM5033SD SWITCHING CONTROLLER, VOLTAGE-MO 4,463 $1.1300 97%
LM5030SD SWITCHING CONTROLLER, CURRENT-MO 7,502 $0.6700 100%
LM5030SDX/NOPB IC REG CTRLR MULT TOPOLOGY 10SON 2,982 RFQ 100%
LM5030SDX IC REG CTRLR MULT TOPOLOGY 10SON 2,718 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LM5030SD/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.