LM4871N Texas Instruments component image

LM4871N

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC AMP CLASS AB MONO 3W 8DIP

Listed in Linear - Amplifiers - Audio

4,411 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LM4871N?

LM4871N is a ic amp class ab mono 3w 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 2V ~ 5.5V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
LM4871MM/NOPB IC AMP CLASS AB MONO 3W 8VSSOP 3,007 $1.6900 In Stock
LM4871MX/NOPB IC AMP CLASS AB MONO 3W 8SOIC 3,376 $1.5000 In Stock
LM4871LD/NOPB IC AMP CLASS AB MONO 3W 8WSON 3,638 $1.3900 In Stock
LM4871LD IC AMP CLASS AB MONO 3W 8WSON 4,208 RFQ In Stock
LM4871MMX/NOPB IC AMP CLASS AB MONO 3W 8VSSOP 3,002 $1.6900 In Stock
LM4871M IC AMP CLASS AB MONO 3W 8SOIC 2,934 $1.7300 In Stock
LM4871LDX/NOPB IC AMP CLASS AB MONO 3W 8WSON 3,017 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LM4871N Specifications

Series Boomer®
Package Tube
Part Status Obsolete
Type Class AB
Output Type 1-Channel (Mono)
Max Output Power x Channels @ Load 3W x 1 @ 3Ohm
Voltage - Supply 2V ~ 5.5V
Features Shutdown, Thermal Protection
Mounting Type Through Hole
Operating Temperature -40°C ~ 85°C (TA)
Supplier Device Package 8-PDIP
Package / Case 8-DIP (0.300", 7.62mm)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NJM2149D IC AMP CLASS AB MONO 250MW 8DIP 11,147 $0.4500 96%
SSM2211P 1.5 W AUDIO POWER AMPLIFIER 3,941 $1.2800 86%
LM4880N AUDIO AMPLIFIER 6,300 $0.8000 86%
LM4864N AUDIO AMPLIFIER 10,672 $0.4700 86%
LM4881N/NOPB IC AMP CLASS AB STER 300MW 8DIP 3,308 RFQ 86%
TDA1308/N2,112 IC AMP CLASS AB STEREO 80MW 8DIP 3,472 RFQ 71%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LM4871N or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.