LM4040D41ILP Texas Instruments component image

LM4040D41ILP

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC VREF SHUNT 1% TO92-3

Listed in PMIC - Voltage Reference

5,656 pcs in stock ships same day before 6pm

from $0.3797

Quantity Unit Price
1 - 9 $0.8900
10 - 99 $0.7830
100 - 499 $0.6004
500 - 999 $0.4747
1,000+ $0.3797 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LM4040D41ILP?

LM4040D41ILP is a ic vref shunt 1% to92-3, featuring the TO-226-3, TO-92-3 (TO-226AA) package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

25 variants of this series in stock
Part Number Description Stock Unit Price Status
LM4040D25ILPR IC VREF SHUNT 1% TO92-3 6,806 $0.7400 In Stock
LM4040D41ILPE3 IC VREF SHUNT 1% TO92-3 5,660 $0.8900 In Stock
LM4040C82ILPR IC VREF SHUNT 0.5% TO92-3 5,304 $0.9500 In Stock
LM4040D25ILP IC VREF SHUNT 1% TO92-3 5,654 $0.8900 In Stock
LM4040C25ILPR IC VREF SHUNT 0.5% TO92-3 5,307 $0.9500 In Stock
LM4040C30ILPR IC VREF SHUNT 0.5% TO92-3 5,252 $0.9600 In Stock
LM4040D10ILP IC VREF SHUNT 1% TO92-3 5,655 $0.8900 In Stock
LM4040C10ILPR IC VREF SHUNT 0.5% TO92-3 5,313 $0.9500 In Stock
LM4040D50ILP IC VREF SHUNT 1% TO92-3 5,654 $0.8900 In Stock
LM4040D30ILP IC VREF SHUNT 1% TO92-3 5,647 $0.8900 In Stock
+ 15 more variants in stock — browse the full category

Technical Parameters

LM4040D41ILP Specifications

Series -
Package Bulk
Part Status Active
Reference Type Shunt
Output Type Fixed
Voltage - Output (Min/Fixed) 4.096V
Voltage - Output (Max) -
Current - Output 15 mA
Tolerance ±1%
Temperature Coefficient 150ppm/°C
Noise - 0.1Hz to 10Hz -
Noise - 10Hz to 10kHz 80µVrms
Voltage - Input -
Current - Supply -
Current - Cathode 88 µA
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Through Hole
Package / Case TO-226-3, TO-92-3 (TO-226AA)
Supplier Device Package TO-92-3

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LM4040D41ILP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.