LM1117T-ADJ Rochester Electronics component image

LM1117T-ADJ

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR ADJ POS LDO REG

Listed in PMIC - Voltage Regulators - Linear

8,810 pcs in stock ships same day before 6pm

from $0.5700

Quantity Unit Price
1+ $0.5700 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LM1117T-ADJ?

LM1117T-ADJ is a ic reg linear adj pos ldo reg, featuring the TO-220-3 package, Through Hole mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
LM1117MPX-2.5 IC REG LINEAR FIXED POS LDO REG 11,947 $0.4200 In Stock
LM1117SX-ADJ IC REG LIN POS ADJ 800MA DDPAK 7,973 $0.6300 In Stock
LM1117MP-2.5 IC REG LINEAR FIXED POS LDO REG 11,934 $0.4200 In Stock
LM1117MP-3.3 IC REG LINEAR FIXED POS LDO REG 11,945 $0.4200 In Stock
LM1117IDT-5.0 IC REG LIN FIXED POS LDO REG 5V 9,658 $0.5200 In Stock
LM1117IMP-ADJ IC REG LINEAR ADJ POS LDO REG 11,952 $0.4200 In Stock
LM1117DT-1.8 IC REG LINEAR FIXED POS LDO REG 9,650 $0.5200 In Stock
LM1117LDX-ADJ/NOPB IC REG LIN POS ADJ 800MA 8WSON 8,111 $0.6200 In Stock
LM1117T-1.8 IC REG LINEAR FIXED LDO REG 13,927 $0.3600 In Stock
LM1117DT-2.5 IC REG LINEAR FIXED POS LDO REG 9,657 $0.5200 In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

LM1117T-ADJ Specifications

Series -
Package Bulk
Part Status Active
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 15V
Voltage - Output (Min/Fixed) 1.25V
Voltage - Output (Max) 13.8V
Voltage Dropout (Max) 1.2V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 5 mA
Current - Supply (Max) 10 mA
PSRR 75dB (120Hz)
Control Features -
Protection Features Over Current, Over Temperature
Operating Temperature 0°C ~ 125°C
Mounting Type Through Hole
Package / Case TO-220-3
Supplier Device Package TO-220-3

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LM1117T-ADJ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.