LM1117IMPX-ADJ/NOPB Texas Instruments component image

LM1117IMPX-ADJ/NOPB

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG LIN POS ADJ 800MA SOT223

Listed in PMIC - Voltage Regulators - Linear

4,319 pcs in stock ships same day before 6pm

from $0.4275

Quantity Unit Price
1 - 1,999 $1.1700
2,000 - 5,999 $0.4676
6,000 - 9,999 $0.4442
10,000+ $0.4275 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LM1117IMPX-ADJ/NOPB?

LM1117IMPX-ADJ-NOPB is a ic reg lin pos adj 800ma sot223, featuring the TO-261-4, TO-261AA package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
MC33063ADR2GH IC REG LIN SWITCHING VOLT MODE 9,849 $0.5100 In Stock
CAT6221-MLTD-GT3 IC REG LIN 2.8/2.7V 300MA TSOT23 9,850 $0.5100 In Stock
LM79L15ACM IC REG LINEAR FIXED NEG STND 15V 10,050 $0.5000 In Stock
CAT6221-PGTD-GT3 IC REG LIN 3V/1.8V 300MA TSOT23 9,841 $0.5100 In Stock
CAT6221-SPTD-GT3 IC REG LIN 3.3V/3V 300MA TSOT23 9,846 $0.5100 In Stock
CAT6221-SFTD-GT3 IC REG LIN 3.3/1.5V 300MA TSOT23 9,835 $0.5100 In Stock
TPS73216DBVR IC REG LINEAR 1.6V 250MA SOT23-5 9,835 $0.5100 In Stock
LM2931T-5.0 IC REG LINEAR 5V 100MA TO220AB 10,045 $0.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LM1117IMPX-ADJ/NOPB Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 15V
Voltage - Output (Min/Fixed) 1.25V
Voltage - Output (Max) 13.8V
Voltage Dropout (Max) 1.2V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 5 mA
Current - Supply (Max) 10 mA
PSRR 75dB (120Hz)
Control Features -
Protection Features Over Current, Over Temperature
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Supplier Device Package SOT-223-4

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need LM1117IMPX-ADJ/NOPB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.