LD1117DT12CTR STMicroelectronics component image

LD1117DT12CTR

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC REG LINEAR 1.2V 800MA DPAK

Listed in PMIC - Voltage Regulators - Linear

8,372 pcs in stock ships same day before 6pm

from $0.1650

Quantity Unit Price
1 - 4,999 $0.6000
5,000+ $0.1650 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LD1117DT12CTR?

LD1117DT12CTR is a ic reg linear 1.2v 800ma dpak, featuring the TO-252-3, DPak (2 Leads + Tab), SC-63 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

50 variants of this series in stock
Part Number Description Stock Unit Price Status
LD1117V33C-DG IC REG LINEAR 3.3V 800MA TO220 5,477 $0.9200 In Stock
LD1117V33-DG IC REG LINEAR 3.3V 800MA TO220AB 5,141 $0.9800 In Stock
LD1117S12TR IC REG LINEAR 1.2V 800MA SOT223 9,296 $0.5400 In Stock
LD1117D33 IC REG LINEAR 3.3V 800MA 8SO 4,563 RFQ In Stock
LD1117S28TR IC REG LINEAR 2.85V 800MA SOT223 1,608 RFQ In Stock
LD1117S33TR IC REG LINEAR 3.3V 800MA SOT223 10,902 $0.4600 In Stock
LD1117F33C IC REG LINEAR 3.3V 800MA TO220AB 1,598 RFQ In Stock
LD1117DTR IC REG LINEAR POS ADJ 800MA 8SO 4,923 RFQ In Stock
LD1117D33CTR IC REG LINEAR 3.3V 800MA 8SO 8,668 $0.5800 In Stock
LD1117V18 IC REG LINEAR 1.8V 800MA TO220AB 6,451 $0.7800 In Stock
+ 40 more variants in stock — browse the full category

Technical Parameters

LD1117DT12CTR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 15V
Voltage - Output (Min/Fixed) 1.2V
Voltage - Output (Max) -
Voltage Dropout (Max) 1.3V @ 800mA
Current - Output 800mA
Current - Quiescent (Iq) 5 mA
Current - Supply (Max) -
PSRR 75dB (120Hz)
Control Features -
Protection Features Over Current, Over Temperature
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package DPAK

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need LD1117DT12CTR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.