LAK2D331MELA30 Nichicon component image

LAK2D331MELA30

In Stock

Nichicon logo Nichicon · franchised distributor

CAP ALUM 330UF 20% 200V SNAP

Listed in Aluminum Electrolytic Capacitors

2,088 pcs in stock ships same day before 6pm

from $2.3346

Quantity Unit Price
1 - 249 $2.4513
250+ $2.3346 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LAK2D331MELA30?

LAK2D331MELA30 is a cap alum 330uf 20% 200v snap, featuring a capacitance of 330 µF, a rated voltage of 200 V, a tolerance of ±20%, and the Radial, Can - Snap-In case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Nichicon Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
LAK2G151MELA35 CAP ALUM 150UF 20% 400V SNAP 1,760 $2.9065 In Stock
16RX304700MGC16X35.5 CAP ALUM 4700UF 20% 16V RADIAL 2,808 $1.8098 In Stock
LAK2D471MELA35 CAP ALUM 470UF 20% 200V SNAP 1,966 $2.5879 In Stock
LAK2G181MELZ50 CAP ALUM 180UF 20% 400V SNAP 1,628 $3.1604 In Stock
400VXG120MEFCSN25X25 CAP ALUM 120UF 20% 400V SNAP 1,890 $2.6962 In Stock
LAK2D471MELB25 CAP ALUM 470UF 20% 200V SNAP 1,624 $3.1538 In Stock
LAK2G680MELA25 CAP ALUM 68UF 20% 400V SNAP 2,521 $2.0121 In Stock
LAK2G470MELB20 CAP ALUM 47UF 20% 400V SNAP 2,107 $2.4210 In Stock
LAKW6181MELC30 CAP ALUM 180UF 20% 420V SNAP 1,216 $4.2338 In Stock
LAKW6820MELA30 CAP ALUM 82UF 20% 420V SNAP 2,120 $2.4084 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

LAK2D331MELA30 Specifications

Series LAK
Package Bulk
Part Status Active
Capacitance 330 µF
Tolerance ±20%
Voltage - Rated 200 V
ESR (Equivalent Series Resistance) -
Lifetime @ Temp. 2000 Hrs @ 105°C
Operating Temperature -25°C ~ 105°C
Polarization Polar
Ratings -
Applications General Purpose
Ripple Current @ Low Frequency 1.05 A @ 120 Hz
Ripple Current @ High Frequency 1.26 A @ 10 kHz
Impedance -
Lead Spacing 0.394" (10.00mm)
Size / Dimension 0.984" Dia (25.00mm)
Height - Seated (Max) 1.260" (32.00mm)
Surface Mount Land Size -
Mounting Type Through Hole
Package / Case Radial, Can - Snap-In

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
LGJ2D101MELY15 CAP ALUM 100UF 20% 200V SNAP 2,690 $1.8847 100%
200SXC220MEFCSN30X20 CAP ALUM 220UF 20% 200V SNAP 2,329 $2.1779 100%
200SXC1000MEFC30X45 CAP ALUM 1000UF 20% 200V SNAP 1,116 $4.6872 100%
EKMH201VNN332MA80U CAP ALUM 3300UF 20% 200V SNAP 879 $5.9002 100%
MAL209432122E3 CAP ALUM 1200UF 20% 200V SNAP 915 $5.7050 100%
LAK2D271MELZ30 CAP ALUM 270UF 20% 200V SNAP 2,525 $2.0200 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Nichicon Parts in Stock

Request a Quote

Need LAK2D331MELA30 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.