INA2290A1IDGKT Texas Instruments component image

INA2290A1IDGKT

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

DUAL-CHANNEL, 2.7-V TO 120-V, 1.

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

890 pcs in stock ships same day before 6pm

from $5.8100

Quantity Unit Price
1+ $5.8100 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the INA2290A1IDGKT?

INA2290A1IDGKT is a dual-channel, 2.7-v to 120-v, 1, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
INA2290A3IDGKT DUAL-CHANNEL, 2.7-V TO 120-V, 1. 906 $5.8100 In Stock
INA2290A4IDGKT DUAL-CHANNEL, 2.7-V TO 120-V, 1. 898 $5.8100 In Stock
INA2290A5IDGKT DUAL-CHANNEL, 2.7-V TO 120-V, 1. 896 $5.8100 In Stock
INA2290A2IDGKT DUAL-CHANNEL, 2.7-V TO 120-V, 1. 895 $5.8100 In Stock
INA2290A1IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,038 $5.0600 In Stock
INA2290A4IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,027 $5.0600 In Stock
INA2290A2IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,019 $5.0600 In Stock
INA2290A3IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,029 $5.0600 In Stock
INA2290A5IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,023 $5.0600 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

INA2290A1IDGKT Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type Current Sense
Number of Circuits 1
Output Type -
Slew Rate 2V/µs
Gain Bandwidth Product 1.1 MHz
-3db Bandwidth -
Current - Input Bias 20 µA
Voltage - Input Offset 6 µV
Current - Supply 680µA
Current - Output / Channel -
Voltage - Supply, Single/Dual (±) 2.7V ~ 20V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
INA2290A1IDGKR DUAL-CHANNEL, 2.7-V TO 120-V, 1. 1,038 $5.0600 100%
OPA2188AQDGKRQ1 PRECISION, LOW-NOISE, RAIL-TO-RA 2,367 $2.1500 55%
OPA188AIDGKT IC OPAMP ZERO-DRIFT 1CIRC 8VSSOP 1,757 $2.9100 55%
OPA2188AIDGKR IC OPAMP ZERO-DRIFT 2CIRC 8VSSOP 1,382 $3.7400 55%
OPA188AQDGKRQ1 IC OPAMP ZERO-DRIFT 1CIRC 8VSSOP 1,813 $2.8200 55%
OPA188AIDGKR IC OPAMP ZERO-DRIFT 1CIRC 8VSSOP 3,729 $1.3527 55%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need INA2290A1IDGKT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.