INA126E/2K5 Texas Instruments component image

INA126E/2K5

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC INST AMP 1 CIRCUIT 8VSSOP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,231 pcs in stock ships same day before 6pm

from $2.0424

Quantity Unit Price
1 - 2,499 $4.1600
2,500+ $2.0424 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the INA126E/2K5?

INA126E-2K5 is a ic inst amp 1 circuit 8vssop, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

21 variants of this series in stock
Part Number Description Stock Unit Price Status
INA126U IC INST AMP 1 CIRCUIT 8SOIC 1,081 $4.8000 In Stock
INA2126UA IC INST AMP 2 CIRCUIT 16SOIC 928 $5.6500 In Stock
INA2126EA/250G4 IC INST AMP 2 CIRCUIT 16SSOP 1,276 $4.0456 In Stock
INA126U/2K5G4 IC INST AMP 1 CIRCUIT 8SOIC 2,205 $2.2979 In Stock
INA126E/2K5G4 IC INST AMP 1 CIRCUIT 8VSSOP 2,063 $2.4716 In Stock
INA126UAG4 IC INST AMP 1 CIRCUIT 8SOIC 1,834 $2.7719 In Stock
INA126E/250 IC INST AMP 1 CIRCUIT 8VSSOP 1,137 $4.5900 In Stock
INA2126E/250 IC INST AMP 2 CIRCUIT 16SSOP 821 $6.4300 In Stock
INA126E/250G4 IC INST AMP 1 CIRCUIT 8VSSOP 1,606 $3.2062 In Stock
INA126UA IC INST AMP 1 CIRCUIT 8SOIC 1,364 $3.7700 In Stock
+ 11 more variants in stock — browse the full category

Technical Parameters

INA126E/2K5 Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type Instrumentation
Number of Circuits 1
Output Type -
Slew Rate 0.4V/µs
Gain Bandwidth Product -
-3db Bandwidth 200 kHz
Current - Input Bias 10 nA
Voltage - Input Offset 100 µV
Current - Supply 175µA
Current - Output / Channel 10 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 36V, ±1.35V ~ 18V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-VSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
INA126E/250G4 IC INST AMP 1 CIRCUIT 8VSSOP 1,606 $3.2062 100%
INA126E/250 IC INST AMP 1 CIRCUIT 8VSSOP 1,137 $4.5900 100%
INA126E/2K5G4 IC INST AMP 1 CIRCUIT 8VSSOP 2,063 $2.4716 100%
LT6105IMS8#TRPBF IC CURR SENSE 1 CIRCUIT 8MSOP 1,609 $3.2000 98%
LT6105CMS8#TRPBF IC CURR SENSE 1 CIRCUIT 8MSOP 1,812 $2.8100 98%
LT6105CMS8#PBF IC CURR SENSE 1 CIRCUIT 8MSOP 1,741 $2.9400 98%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need INA126E/2K5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.