INA121UAG4 Texas Instruments component image

INA121UAG4

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC INST AMP 1 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,040 pcs in stock ships same day before 6pm

from $4.9811

Quantity Unit Price
1 - 149 $4.9811 BEST
150+ $4.9811 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the INA121UAG4?

INA121UAG4 is a ic inst amp 1 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
INA121U/2K5 IC INST AMP 1 CIRCUIT 8SOIC 675 $7.8800 In Stock
INA121P IC INST AMP 1 CIRCUIT 8DIP 609 $8.7100 In Stock
INA121U/2K5G4 IC INST AMP 1 CIRCUIT 8SOIC 990 $5.2171 In Stock
INA121UG4 IC INST AMP 1 CIRCUIT 8SOIC 682 $7.7445 In Stock
INA121PA IC INST AMP 1 CIRCUIT 8DIP 824 $6.3800 In Stock
INA121UA/2K5 IC INST AMP 1 CIRCUIT 8SOIC 853 $6.1800 In Stock
INA121UA IC INST AMP 1 CIRCUIT 8SOIC 791 $6.6600 In Stock
INA121UA/2K5G4 IC INST AMP 1 CIRCUIT 8SOIC 1,391 $3.6740 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

INA121UAG4 Specifications

Series -
Package Tube
Part Status Active
Amplifier Type Instrumentation
Number of Circuits 1
Output Type -
Slew Rate 0.7V/µs
Gain Bandwidth Product -
-3db Bandwidth 600 kHz
Current - Input Bias 4 pA
Voltage - Input Offset 300 µV
Current - Supply 450µA
Current - Output / Channel 14 mA
Voltage - Supply, Single/Dual (±) 4.5V ~ 36V, ±2.25V ~ 18V
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
INA121UAE4 INA121 FET-INPUT, LOW POWER INST 1,326 $3.9100 100%
INA121UA/2K5 IC INST AMP 1 CIRCUIT 8SOIC 853 $6.1800 100%
INA121UA IC INST AMP 1 CIRCUIT 8SOIC 791 $6.6600 100%
INA121UA/2K5G4 IC INST AMP 1 CIRCUIT 8SOIC 1,391 $3.6740 100%
TLE2072CD IC OPAMP JFET 2 CIRCUIT 8SOIC 1,214 $4.2200 98%
TLE2072IDRG4 IC OPAMP JFET 2 CIRCUIT 8SOIC 2,745 $1.8437 98%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need INA121UAG4 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.