HV-AT(2)-PJ Hirose component image

HV-AT(2)-PJ

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 2DB 50OHM 1.85MM

Listed in Attenuators

56 pcs in stock ships same day before 6pm

from $618.1200

Quantity Unit Price
1+ $618.1200 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HV-AT(2)-PJ?

HV-AT-2--PJ is a rf attenuator 2db 50ohm 1.85mm, featuring the 1.85mm In-Line Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Hirose Series Variants in Stock

6 variants of this series in stock
Part Number Description Stock Unit Price Status
HV-AT(4)-PJ RF ATTENUATOR 4DB 50OHM 1.85MM 39 $618.1200 In Stock
HV-AT(3)-PJ RF ATTENUATOR 3DB 50OHM 1.85MM 57 $612.0000 In Stock
HV-AT(1)-PJ RF ATTENUATOR 1DB 50OHM 1.85MM 40 $612.0000 In Stock
HV-AT(6)-PJ RF ATTENUATOR 6DB 50OHM 1.85MM 40 $612.0000 In Stock
HV-AT(0)-PJ RF ATTENUATOR 0DB 50OHM 1.85MM 51 $570.0000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

HV-AT(2)-PJ Specifications

Series 1.85mm
Package Tray
Part Status Active
Attenuation Value 2dB
Frequency Range 0 Hz ~ 67.0 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case 1.85mm In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
HV-AT(3)-PJ RF ATTENUATOR 3DB 50OHM 1.85MM 57 $612.0000 100%
HV-AT(1)-PJ RF ATTENUATOR 1DB 50OHM 1.85MM 40 $612.0000 100%
HV-AT(20)-PJ RF ATTENUATOR 20DB 50OHM 1.85MM 45 $612.0000 100%
HV-AT(6)-PJ RF ATTENUATOR 6DB 50OHM 1.85MM 40 $612.0000 100%
HV-AT(4)-PJ RF ATTENUATOR 4DB 50OHM 1.85MM 39 $618.1200 100%
HV-AT(0)-PJ RF ATTENUATOR 0DB 50OHM 1.85MM 51 $570.0000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need HV-AT(2)-PJ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.