HMC654LP2ETR XinYun Electronics component image

HMC654LP2ETR

In Stock

XinYun Electronics logo XinYun Electronics · franchised distributor

RF ATTENUATOR 4DB 50OHM 6VDFN

Listed in Attenuators

745 pcs in stock ships same day before 6pm

from $4.6309

Quantity Unit Price
1 - 499 $7.0400
500+ $4.6309 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HMC654LP2ETR?

HMC654LP2ETR is a rf attenuator 4db 50ohm 6vdfn, featuring the 6-VDFN Exposed Pad case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

XinYun Electronics Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
HMC653LP2E RF ATTENUATOR 3DB 50OHM 6TDFN 743 $7.0400 In Stock
HMC652LP2ETR RF ATTENUATOR 2DB 50OHM 6TDFN 740 $7.0400 In Stock
HMC655LP2ETR RF ATTENUATOR 6DB 50OHM 6TDFN 746 $7.0400 In Stock
HMC655LP2E RF ATTENUATOR 6DB 50OHM 6TDFN 751 $7.0400 In Stock
HMC654LP2E RF ATTENUATOR 4DB 50OHM 6VDFN 752 $7.0400 In Stock
HMC653LP2ETR RF ATTENUATOR 3DB 50OHM 6TDFN 751 $7.0400 In Stock
HMC652LP2E RF ATTENUATOR 2DB 50OHM 6TDFN 742 $7.0400 In Stock
119197-HMC653LP2E BOARD EVAL HMC653LP2E 82 $119.6100 In Stock
119197-HMC652LP2E BOARD EVAL HMC652LP2E 73 $119.6100 In Stock
119197-HMC654LP2E BOARD EVAL HMC654LP2E 90 $119.6100 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

HMC654LP2ETR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Attenuation Value 4dB
Frequency Range 0 Hz ~ 25.0 GHz
Power (Watts) -
Impedance 50 Ohms
Package / Case 6-VDFN Exposed Pad

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

XinYun Electronics Parts in Stock

Request a Quote

Need HMC654LP2ETR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.