HMC1210JT22M0 Stackpole Electronics, Inc. component image

HMC1210JT22M0

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 22M OHM 5% 1/3W 1210

Listed in Chip Resistor - Surface Mount

101,742 pcs in stock ships same day before 6pm

from $0.0469

Quantity Unit Price
1 - 4,999 $0.0492
5,000+ $0.0469 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HMC1210JT22M0?

HMC1210JT22M0 is a res 22m ohm 5% 1/3w 1210, featuring a power rating of 0.333W, 1/3W, a tolerance of ±5%, a Thick Film composition, and the 1210 (3125 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
HMC1206JT75M0 RES 75M OHM 5% 1/4W 1206 8,371 $0.6000 In Stock
HMC0805KT82M0 RES 82M OHM 10% 1/8W 0805 53,723 $0.0932 In Stock
HMC0805JT50M0 RES 50M OHM 5% 1/8W 0805 8,110 $0.6200 In Stock
HMC0603JT82M0 RES 82M OHM 5% 1/10W 0603 12,232 $0.4100 In Stock
HMC0805KT100M RES 100M OHM 10% 1/8W 0805 53,710 $0.0932 In Stock
HMC0603KT100M RES 100M OHM 10% 1/10W 0603 101,750 $0.0492 In Stock
HMC0805JT330M RES 330M OHM 5% 1/8W 0805 40,901 $0.1224 In Stock
HMC1206JT82M0 RES 82M OHM 5% 1/4W 1206 43,630 $0.1147 In Stock
HMC0603JT43M0 RES 43M OHM 5% 1/10W 0603 12,237 $0.4100 In Stock
HMC1206JT470M RES 470M OHM 5% 1/4W 1206 33,110 $0.1512 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

HMC1210JT22M0 Specifications

Series HMC
Package Tape & Reel (TR)
Part Status Active
Resistance 22 MOhms
Tolerance ±5%
Power (Watts) 0.333W, 1/3W
Composition Thick Film
Features -
Temperature Coefficient ±400ppm/°C
Operating Temperature -55°C ~ 125°C
Package / Case 1210 (3125 Metric)
Supplier Device Package 1210
Ratings -
Size / Dimension 0.126" L x 0.102" W (3.20mm x 2.60mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need HMC1210JT22M0 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.