HHM2204SA1 TDK Corporation component image

HHM2204SA1

In Stock

TDK Corporation logo TDK Corporation · franchised distributor

RF DIR COUPLR 1.71-1.785GHZ 0603

Listed in RF Directional Coupler

4,632 pcs in stock ships same day before 6pm

from $0.4375

Quantity Unit Price
1 - 3,999 $1.0900
4,000+ $0.4375 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HHM2204SA1?

HHM2204SA1 is a rf dir couplr 1.71-1.785ghz 0603, featuring a frequency of 1.71GHz ~ 1.785GHz, an insertion loss of 0.35dB, a Standard coupler, and the 0603 (1608 Metric) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

TDK Corporation Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CP0402A2400FLTR RF DIR COUPLER 2.4GHZ 0402 20,874 $0.2400 In Stock
CP0402A1950ELTR RF DIR COUPLER 1.9GHZ 0402 23,542 $0.2128 In Stock
CP0402A1950FLTR RF DIR COUPLER 1.9GHZ 0402 23,536 $0.2128 In Stock
CP0402A4600ELTR RF DIR COUPLER 4.6GHZ 0402 20,873 $0.2400 In Stock
CP0402A3500ELTR RF DIR COUPLER 3.5GHZ 0402 20,863 $0.2400 In Stock
CP0402A1950ALTR RF DIR COUPLER 1.9GHZ 0402 23,533 $0.2128 In Stock
CP0402A4200ELTR RF DIR COUPLER 4.2GHZ 0402 20,869 $0.2400 In Stock
CP0402A0881ALTR RF DIR COUPLER 869-894MHZ 0402 20,866 $0.2400 In Stock
CP0402A0836BLTR RF DIR COUPLER 824-849MHZ 0402 20,882 $0.2400 In Stock
CP0402A0836ELTR RF DIR COUPLER 824-849MHZ 0402 20,863 $0.2400 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

HHM2204SA1 Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Not For New Designs
Coupler Type Standard
Frequency 1.71GHz ~ 1.785GHz
Coupling Factor -15 ± 1dB
Applications DCS
Insertion Loss 0.35dB
Power - Max -
Isolation 25dB
Return Loss -
Package / Case 0603 (1608 Metric)
Supplier Device Package 0603

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

TDK Corporation Parts in Stock

Request a Quote

Need HHM2204SA1 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.