FCSL90R050FER Ohmite component image

FCSL90R050FER

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.05 OHM 4W 3518 WIDE

Listed in Chip Resistor - Surface Mount

3,084 pcs in stock ships same day before 6pm

from $0.6817

Quantity Unit Price
1 - 999 $1.6400
1,000 - 1,999 $0.7235
2,000 - 4,999 $0.7095
5,000 - 9,999 $0.7012
10,000+ $0.6817 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the FCSL90R050FER?

FCSL90R050FER is a res 0.05 ohm 4w 3518 wide, featuring a power rating of 4W, a tolerance of ±1%, a Metal Foil composition, and the Wide 3518 (9045 Metric), 1835 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
FCSL20R005FER RES 0.005 OHM 1% 1W 0805 7,985 $0.6300 In Stock
FCSL110R050FER RES 0.05 OHM 5W 4320 WIDE 2,115 $2.4200 In Stock
FCSL110R025FER RES 0.025 OHM 5W 4320 WIDE 2,098 $2.4200 In Stock
FCSL150R025FER RES 0.025 OHM 10W 2959 WIDE 915 $5.6700 In Stock
FCSL110R002GER RES 0.002 OHM 5W 4320 WIDE 2,110 $2.4200 In Stock
FCSL32R025FER RES 0.025 OHM 1% 1.5W 1206 7,971 $0.6300 In Stock
FCSL20R020FER RES 0.02 OHM 1% 1W 0805 47,038 $0.1064 In Stock
FCSL76R001JER RES 0.001 OHM 3W 3015 WIDE 3,432 $1.4700 In Stock
FCSL76R005FER RES 0.005 OHM 3W 3015 WIDE 3,450 $1.4700 In Stock
FCSL76R025DER RES 0.025 OHM 0.5% 3W 3015 3,203 $1.5800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

FCSL90R050FER Specifications

Series FCSL
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 50 mOhms
Tolerance ±1%
Power (Watts) 4W
Composition Metal Foil
Features Current Sense, Moisture Resistant
Temperature Coefficient ±50ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Wide 3518 (9045 Metric), 1835
Supplier Device Package 9045
Ratings -
Size / Dimension 0.177" L x 0.350" W (4.50mm x 8.90mm)
Height - Seated (Max) 0.028" (0.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
FCSL90R050DER RES 0.05 OHM 0.5% 4W 3518 2,873 $1.7700 84%
FCSL90R030FER RES SMD 30M OHM 1% 4W 3518 WIDE 5,914 $0.8500 69%
FCSL90R025FER RES 0.025 OHM 4W 3518 WIDE 3,095 $1.6400 58%
FCSL90R030DER RES 0.03 OHM 0.5% 4W 3518 6,631 $0.7581 54%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need FCSL90R050FER or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.