F40J75R Ohmite component image

F40J75R

In Stock

Ohmite logo Ohmite · franchised distributor

RES CHAS MNT 75 OHM 5% 40W

Listed in Chassis Mount Resistors

417 pcs in stock ships same day before 6pm

from $12.8960

Quantity Unit Price
1 - 24 $12.8960 BEST
25+ $12.8960 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the F40J75R?

F40J75R is a res chas mnt 75 ohm 5% 40w, featuring a power rating of 40W, a tolerance of ±5%, a Wirewound composition, and the Radial, Flat Oval case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
F40J50RE RES CHAS MNT 50 OHM 5% 40W 345 $16.3000 In Stock
F55J500E RES CHAS MNT 500 OHM 5% 55W 325 $17.3600 In Stock
F40J500E RES CHAS MNT 500 OHM 5% 40W 356 $16.3000 In Stock
F55J1K0E RES CHAS MNT 1K OHM 5% 55W 323 $17.3600 In Stock
F30J750E RES CHAS MNT 750 OHM 5% 30W 427 $13.1760 In Stock
F55J50RE RES CHAS MNT 50 OHM 5% 55W 345 $16.9400 In Stock
F55J1R0 RES CHAS MNT 1 OHM 5% 55W 362 $15.2100 In Stock
F40J25RE RES CHAS MNT 25 OHM 5% 40W 339 $16.3000 In Stock
F40J1K0E RES CHAS MNT 1K OHM 5% 40W 415 $13.3380 In Stock
F30J10RE RES CHAS MNT 10 OHM 5% 30W 354 $15.8800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

F40J75R Specifications

Series Stackohm® 250
Package Bulk
Part Status Active
Resistance 75 Ohms
Tolerance ±5%
Power (Watts) 40W
Composition Wirewound
Temperature Coefficient ±260ppm/°C
Operating Temperature -55°C ~ 350°C
Features -
Coating, Housing Type Vitreous Enamel Coated
Mounting Feature Flange Braces, Right Angle
Size / Dimension 2.000" L x 1.000" W (50.80mm x 25.40mm)
Height - Seated (Max) 0.563" (14.29mm)
Lead Style Solder Lugs
Package / Case Radial, Flat Oval
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
F40J75RE RES CHAS MNT 75 OHM 5% 40W 413 $13.3380 100%
F40J100E RES CHAS MNT 100 OHM 5% 40W 343 $16.3000 83%
F40J100 RES CHAS MNT 100 OHM 5% 40W 432 $12.8200 83%
F40J50R RES CHAS MNT 50 OHM 5% 40W 421 $12.8960 76%
F40J50RE RES CHAS MNT 50 OHM 5% 40W 345 $16.3000 76%
F40J40RE RES CHAS MNT 40 OHM 5% 40W 419 $13.3380 62%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need F40J75R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.