EW115 NTE Electronics, Inc. component image

EW115

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

1/8W 150 OHM 2%

Listed in Through Hole Resistors

50,041 pcs in stock ships same day before 6pm

from $0.1000

Quantity Unit Price
1+ $0.1000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the EW115?

EW115 is a 1/8w 150 ohm 2%, featuring a power rating of 0.125W, 1/8W, a tolerance of ±2%, a Metal Oxide Film composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

NTE Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
EW047 1/8W 47 OHM 2% 50,045 $0.1000 In Stock
EW124 1/8W 240 OHM 2% 50,034 $0.1000 In Stock
EW375 1/8W 75K OHM 2% 50,031 $0.1000 In Stock
EW2D2 1/8W 2.2 OHM 2% 50,035 $0.1000 In Stock
EW330 1/8W 30K OHM 2% 50,050 $0.1000 In Stock
EW315 1/8W 15K OHM 2% 50,037 $0.1000 In Stock
EW333 1/8W 33K OHM 2% 50,044 $0.1000 In Stock
EW036 1/8W 36 OHM 2% 50,043 $0.1000 In Stock
EW251 1/8W 5.1K OHM 2% 50,044 $0.1000 In Stock
EW030 1/8W 30 OHM 2% 50,047 $0.1000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

EW115 Specifications

Series -
Package Bag
Part Status Active
Resistance 150 Ohms
Tolerance ±2%
Power (Watts) 0.125W, 1/8W
Composition Metal Oxide Film
Features Flame Proof, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.063" Dia x 0.146" L (1.60mm x 3.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
1W116 RES-1W 160 OHM 2% 33,379 $0.1500 94%
RSF2FT150R RES 150 OHM 2W 1% AXIAL 63,818 $0.0784 76%
RSMF1FB150R RES 150 OHM 1W 1% AXIAL 115,784 $0.0432 76%
RSMF2FA150R RES 150 OHM 2W 1% AXIAL 78,164 $0.0640 76%
RSF3JT150R RES 150 OHM 3W 5% AXIAL 34,356 $0.1457 69%
RSMF2JB150R RES 150 OHM 2W 5% AXIAL 142,493 $0.0351 69%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need EW115 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.