ESP32-PICO-V3-ZERO Espressif Systems component image

ESP32-PICO-V3-ZERO

In Stock

Espressif Systems logo Espressif Systems · franchised distributor

SMD MODULE, ESP32-PICO-V3, 3.3V,

Listed in RF Transceiver Modules and Modems

1,403 pcs in stock ships same day before 6pm

from $3.6520

Quantity Unit Price
1+ $3.6520 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ESP32-PICO-V3-ZERO?

ESP32-PICO-V3-ZERO is a smd module, esp32-pico-v3, 3.3v,, featuring a frequency of 2.412GHz ~ 2.484GHz, the Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Part Number Logic · Espressif

Reading ESP32-PICO-V3-ZERO

ESP32 Family— Dual-core 32-bit SoC with Wi-Fi/BLE (Espressif ESP32)
— Variant code— W=WROOM, S=WROVER modules; standalone SoC variants

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

ESP32-PICO-V3-ZERO Specifications

Series ESP32
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
RF Family/Standard Bluetooth, WiFi
Protocol 802.11b/g/n, Bluetooth 4.2
Modulation -
Frequency 2.412GHz ~ 2.484GHz
Data Rate 150Mbps
Power - Output 19.5dBm
Sensitivity -97dBm
Serial Interfaces GPIO, I²C, I²S, SDIO, SPI, UART
Antenna Type PCB Trace
Utilized IC / Part -
Memory Size 448kB ROM, 520kB SRAM
Voltage - Supply 3V ~ 3.6V
Current - Receiving 110mA ~ 116mA
Current - Transmitting 162mA ~ 233mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
WL1801MODGBMOCT RX TXRX MOD WIFI SURFACE MOUNT 361 $15.4100 95%
1104528 BX3105 RX TXRX MOD WIFI TRACE ANT SMD 491 $10.8800 92%
1104231 BX3105 RX TXRX MOD WIFI TRACE ANT SMD 507 $10.8800 92%
WL1835MODGBMOCT RX TXRX MOD WIFI SURFACE MOUNT 269 $22.5000 92%
WL1835MODGBMOCR RX TXRX MOD WIFI SURFACE MOUNT 283 $21.4300 92%
WL1805MODGBMOCT RX TXRX MOD WIFI SURFACE MOUNT 294 $19.8200 92%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Espressif Systems Parts in Stock

Request a Quote

Need ESP32-PICO-V3-ZERO or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.