ESP32-PICO-V3-02 Espressif Systems component image

ESP32-PICO-V3-02

In Stock

Espressif Systems logo Espressif Systems · franchised distributor

SIP MODULE WIFI BLE COMBO

Listed in RF Transceiver Modules and Modems

1,420 pcs in stock ships same day before 6pm

from $3.6000

Quantity Unit Price
1+ $3.6000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ESP32-PICO-V3-02?

ESP32-PICO-V3-02 is a sip module wifi ble combo, featuring a frequency of 2.412GHz ~ 2.484GHz, the 48-LFQFN Exposed Pad case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Part Number Logic · Espressif

Reading ESP32-PICO-V3-02

ESP32 Family— Dual-core 32-bit SoC with Wi-Fi/BLE (Espressif ESP32)
— Variant code— W=WROOM, S=WROVER modules; standalone SoC variants

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

ESP32-PICO-V3-02 Specifications

Series ESP32
Package Strip
Part Status Active
RF Family/Standard Bluetooth, WiFi
Protocol 802.11b/g/n, Bluetooth v4.2
Modulation -
Frequency 2.412GHz ~ 2.484GHz
Data Rate 150Mbps
Power - Output 19.5dBm
Sensitivity -97dBm
Serial Interfaces ADC, GPIO, I²C, I²S, SDIO, SPI, PWM, UART
Antenna Type Antenna Not Included, I-PEX
Utilized IC / Part ESP32
Memory Size 448kB ROM, 520kB SRAM
Voltage - Supply 3V ~ 3.6V
Current - Receiving 111mA ~ 117mA
Current - Transmitting 205mA ~ 385mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case 48-LFQFN Exposed Pad

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Espressif Systems Parts in Stock

Request a Quote

Need ESP32-PICO-V3-02 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.