ESP32-PICO-MINI-02 Espressif Systems component image

ESP32-PICO-MINI-02

In Stock

Espressif Systems logo Espressif Systems · franchised distributor

SMD MODULE ESP32

Listed in RF Transceiver Modules and Modems

1,306 pcs in stock ships same day before 6pm

from $3.9800

Quantity Unit Price
1+ $3.9800 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ESP32-PICO-MINI-02?

ESP32-PICO-MINI-02 is a smd module esp32, featuring a frequency of 2.4GHz, the Module case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Espressif Systems Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
ESP32-S2-SAOLA-1M ESP32-S2-WROOM DEV 4MB FLASH 659 $8.0000 In Stock
C94-M8P-2 NEO-M8P APPLICATION BOARD 49 $399.0000 In Stock
ESP32-DEVKITC-32UE ESP32-WROOM-32UE 4MB FLASH 549 $10.0000 In Stock
EVK-R410M-02B CAT M1 NB1 EVALUATION KIT FOR SA 41 $448.8800 In Stock
ESP32-S2 RX TXRX MOD WIFI SURFACE MOUNT 4,511 $1.1200 In Stock
ESP32-PICO-V3 RX TXRX MOD WIFI SURFACE MOUNT 1,702 $3.0000 In Stock
ESP32-PICO-DEVKITM-2 ESP32 DEV KIT 539 $10.0000 In Stock
+ 3 more variants in stock — browse the full category

Part Number Logic · Espressif

Reading ESP32-PICO-MINI-02

ESP32 Family— Dual-core 32-bit SoC with Wi-Fi/BLE (Espressif ESP32)
— Variant code— W=WROOM, S=WROVER modules; standalone SoC variants

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

ESP32-PICO-MINI-02 Specifications

Series ESP32
Package Strip
Part Status Active
RF Family/Standard Bluetooth, WiFi
Protocol -
Modulation -
Frequency 2.4GHz
Data Rate -
Power - Output 19.5dBm
Sensitivity -
Serial Interfaces I²C, I²S, SPI, UART
Antenna Type PCB Trace
Utilized IC / Part ESP32
Memory Size 8MB Flash, 2MB SRAM
Voltage - Supply -
Current - Receiving -
Current - Transmitting -
Mounting Type Chassis Mount
Operating Temperature -
Package / Case Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Espressif Systems Parts in Stock

Request a Quote

Need ESP32-PICO-MINI-02 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.