EP1WS150RJ TE Connectivity AMP Connectors component image

EP1WS150RJ

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RES 150 OHM 1W 5% AXIAL

Listed in Through Hole Resistors

14,333 pcs in stock ships same day before 6pm

from $0.0347

Quantity Unit Price
1 - 999 $0.3500
1,000 - 1,999 $0.0490
2,000 - 4,999 $0.0450
5,000 - 9,999 $0.0409
10,000 - 24,999 $0.0381
25,000 - 49,999 $0.0362
50,000 - 99,999 $0.0355
100,000+ $0.0347 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the EP1WS150RJ?

EP1WS150RJ is a res 150 ohm 1w 5% axial, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
EP1WS330RJ RES 330 OHM 1W 5% AXIAL 12,869 $0.3900 In Stock
EP5W47RJ RES 47 OHM 5W 5% AXIAL 6,296 $0.8000 In Stock
EP9W3K3J RES 3.3K OHM 9W 5% AXIAL 2,796 $1.8200 In Stock
EP7W1K5J RES 1.5K OHM 7W 5% AXIAL 3,395 $1.4900 In Stock
EP7W1K0J RES 1K OHM 7W 5% AXIAL 3,399 $1.4900 In Stock
EP1WS10RJ RES 10 OHM 1W 5% AXIAL 16,177 $0.3100 In Stock
EP9WS100RJ RES 100 OHM 9W 5% AXIAL 3,177 $1.5900 In Stock
EP1WS470RJ RES 470 OHM 1W 5% AXIAL 91,220 $0.0548 In Stock
EP5W2K2J RES 2.2K OHM 5W 5% AXIAL 5,783 $0.8700 In Stock
EP3W68RJ RES 68 OHM 3W 5% AXIAL 10,234 $0.4900 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

EP1WS150RJ Specifications

Series EP, Neohm
Package Cut Tape (CT)Tape & Box (TB)
Part Status Active
Resistance 150 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features Flame Retardant Coating, Pulse Withstanding, Safety
Temperature Coefficient ±300ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.138" Dia x 0.394" L (3.50mm x 10.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CA0001150R0JE05 RES 150 OHM 1W 5% AXIAL 8,138 $0.6175 100%
CA0001150R0JB14 RES 150 OHM 1W 5% AXIAL 547 $10.0000 100%
EP9W150RJ RES 150 OHM 9W 5% AXIAL 3,248 $1.5600 67%
CA0002150R0JS70 RES 150 OHM 2W 5% AXIAL 13,966 $0.3591 67%
CP0002150R0JB1485 RES 150 OHM 2W 5% AXIAL 544 $10.0000 67%
CA0002150R0JB14 RES 150 OHM 2W 5% AXIAL 530 $10.0000 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need EP1WS150RJ or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.