ELS61T_E2 LAN Rel.2 Thales DIS (Formerly Gemalto) component image

ELS61T_E2 LAN Rel.2

In Stock

Thales DIS (Formerly Gemalto) logo Thales DIS (Formerly Gemalto) · franchised distributor

RF TXRX MOD CELL EU ETH DIN RAIL

Listed in RF Transceiver Modules and Modems

59 pcs in stock ships same day before 6pm

from $201.0600

Quantity Unit Price
1+ $201.0600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ELS61T_E2 LAN Rel.2?

ELS61T-E2-LAN-Rel-2 is a rf txrx mod cell eu eth din rail, featuring a frequency of 800MHz, 900MHz, 1.8GHz, 2.1GHz. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Thales DIS (Formerly Gemalto) Series Variants in Stock

5 variants of this series in stock
Part Number Description Stock Unit Price Status
ELS31T_V LAN Rel.1 RF TXRX MOD CELL VERZ ETH DIN RL 72 $201.0600 In Stock
PLS62T_W USB RF TXRX MOD CEL LTE USB DIN RAIL 77 $163.7900 In Stock
PLS62T_W LAN RF TXRX MOD CELL LTE ETH DIN RL 58 $201.0600 In Stock
ELS61T_US LAN Rel.1 RF TXRX MOD CELL N AMER DIN RAIL 74 $201.0600 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ELS61T_E2 LAN Rel.2 Specifications

Series Cinterion ELS61T
Package Tape & Reel (TR)
Part Status Active
RF Family/Standard Cellular
Protocol EDGE, GPRS, GSM, HSDPA, HSUPA, LTE, UMTS
Modulation 64-QAM
Frequency 800MHz, 900MHz, 1.8GHz, 2.1GHz
Data Rate 10.2Mbps
Power - Output 33dBm
Sensitivity -
Serial Interfaces ADC, GPIO, I²C, I²S, RS232, PCM, SPI
Antenna Type Antenna Not Included
Utilized IC / Part Intel XMM 7160
Memory Size 30MB Flash, 18MB RAM
Voltage - Supply 8V ~ 57V
Current - Receiving 60mA ~ 530mA
Current - Transmitting 60mA ~ 530mA
Mounting Type DIN Rail
Operating Temperature -40°C ~ 90°C
Package / Case -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Thales DIS (Formerly Gemalto) Parts in Stock

Request a Quote

Need ELS61T_E2 LAN Rel.2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.