ECO-S2DA101BA Panasonic component image

ECO-S2DA101BA

In Stock

Panasonic logo Panasonic · franchised distributor

CAP ALUM 100UF 20% 200V SNAP

Listed in Aluminum Electrolytic Capacitors

1,868 pcs in stock ships same day before 6pm

from $0.9191

Quantity Unit Price
1 - 9 $2.7200
10 - 99 $1.6898
100 - 499 $1.0407
500+ $0.9191 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ECO-S2DA101BA?

ECO-S2DA101BA is a cap alum 100uf 20% 200v snap, featuring a capacitance of 100 µF, a rated voltage of 200 V, a tolerance of ±20%, and the Radial, Can - Snap-In case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Panasonic Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
ECO-S1EA223EA CAP ALUM 22000UF 20% 25V SNAP 3,941 RFQ In Stock
ECO-S2GA391EA CAP ALUM 390UF 20% 400V SNAP 580 $9.0800 In Stock
ECO-S1CA333EA CAP ALUM 33000UF 20% 16V SNAP 3,864 RFQ In Stock
ECO-S1KA682EA CAP ALUM 6800UF 20% 80V SNAP 2,458 RFQ In Stock
ECO-S1EA153CA CAP ALUM 15000UF 20% 25V SNAP 1,177 RFQ In Stock
ECO-S1EA222BA CAP ALUM 2200UF 20% 25V SNAP 1,854 $2.7500 In Stock
ECO-S2DB471CA CAP ALUM 470UF 20% 200V SNAP 1,525 RFQ In Stock
ECO-S2DA152EA CAP ALUM 1500UF 20% 200V SNAP 4,281 RFQ In Stock
ECO-S2EB152EA CAP ALUM 1500UF 20% 250V SNAP 4,350 RFQ In Stock
ECO-S2WB101BA CAP ALUM 100UF 20% 450V SNAP 3,126 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

ECO-S2DA101BA Specifications

Series TS-HA
Package Bulk
Part Status Obsolete
Capacitance 100 µF
Tolerance ±20%
Voltage - Rated 200 V
ESR (Equivalent Series Resistance) 1.658Ohm @ 120Hz
Lifetime @ Temp. 3000 Hrs @ 105°C
Operating Temperature -40°C ~ 105°C
Polarization Polar
Ratings -
Applications General Purpose
Ripple Current @ Low Frequency 500 mA @ 120 Hz
Ripple Current @ High Frequency 700 mA @ 100 kHz
Impedance -
Lead Spacing 0.394" (10.00mm)
Size / Dimension 0.866" Dia (22.00mm)
Height - Seated (Max) 1.063" (27.00mm)
Surface Mount Land Size -
Mounting Type Through Hole
Package / Case Radial, Can - Snap-In

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
B43509C2687M000 ALUM ELECT 200V 680UF SNAP-IN 2,052 $2.4934 100%
200MXC1200MEFCSN35X35 CAP ALUM 1200UF 20% 200V SNAP 1,135 $4.5394 100%
B43508B2397M62 CAP ALUM 390UF 20% 200V SNAP 2,136 $2.3930 100%
EKMM201VSN152MR50S CAP ALUM 1500UF 20% 200V SNAP 1,185 $4.3911 100%
B43504E2687M87 CAP ALUM 680UF 20% 200V SNAP 1,008 $5.1802 100%
B43504E2158M87 CAP ALUM 1500UF 20% 200V SNAP 659 $7.9893 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Panasonic Parts in Stock

Request a Quote

Need ECO-S2DA101BA or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.