DTO025C2R200JTE3 Vishay / Sfernice component image

DTO025C2R200JTE3

In Stock

Vishay / Sfernice logo Vishay / Sfernice · franchised distributor

RES SMD 2.2 OHM 5% 25W TO252

Listed in Chip Resistor - Surface Mount

878 pcs in stock ships same day before 6pm

from $2.9661

Quantity Unit Price
1 - 49 $5.9500
50 - 99 $4.5800
100 - 999 $4.0076
1,000+ $2.9661 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DTO025C2R200JTE3?

DTO025C2R200JTE3 is a res smd 2.2 ohm 5% 25w to252, featuring a power rating of 25W, a tolerance of ±5%, a Thick Film composition, and the TO-252-3, DPak (2 Leads + Tab), SC-63 case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Sfernice Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
DTO025C4R700JTE3 RES SMD 4.7 OHM 5% 25W TO252 878 $5.9500 In Stock
DTO025CR0220JTE3 RES 0.022 OHM 5% 25W TO252 976 $5.3592 In Stock
DTO025C10R00JTE3 RES SMD 10 OHM 5% 25W TO252 836 $6.2300 In Stock
DTO025CR1000JTE3 RES 0.1 OHM 5% 25W TO252 997 $5.2670 In Stock
DTO025C10000JTE3 RES SMD 1K OHM 5% 25W TO252 1,087 $4.7886 In Stock
DTO025C22R00JTE3 RES SMD 22 OHM 5% 25W TO252 852 $6.2300 In Stock
DTO025C1R000JTE3 RES SMD 1 OHM 5% 25W TO252 877 $5.9500 In Stock
DTO025C47R00JTE3 RES SMD 47 OHM 5% 25W TO252 1,141 $4.5100 In Stock
DTO025CR4700JTE3 RES 0.47 OHM 5% 25W TO252 889 $5.9500 In Stock
DTO025C470R0JTE3 RES SMD 470 OHM 5% 25W TO252 837 $6.2300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

DTO025C2R200JTE3 Specifications

Series DTO25
Package Tube
Part Status Active
Resistance 2.2 Ohms
Tolerance ±5%
Power (Watts) 25W
Composition Thick Film
Features Automotive AEC-Q200, Non-Inductive
Temperature Coefficient ±150ppm/°C
Operating Temperature -55°C ~ 150°C
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package TO-252, (D-Pak)
Ratings AEC-Q200
Size / Dimension 0.320" L x 0.110" W (8.12mm x 2.79mm)
Height - Seated (Max) 0.033" (0.84mm)
Number of Terminations 3
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

Vishay / Sfernice Parts in Stock

Request a Quote

Need DTO025C2R200JTE3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.