DS1830AU+T&R Maxim Integrated component image

DS1830AU+T&R

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC SUPERVISOR 3 CHANNEL 8UMAX

Listed in PMIC - Supervisors

2,369 pcs in stock ships same day before 6pm

from $2.1450

Quantity Unit Price
1+ $2.1450 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DS1830AU+T&R?

DS1830AU-T-amp-R is a ic supervisor 3 channel 8umax, featuring the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
DS1830AS+ IC SUPERVISOR 3 CHANNEL 8SOIC 1,678 $3.0400 In Stock
DS1830U+ IC SUPERVISOR 3 CHANNEL 8UMAX 1,472 $3.4800 In Stock
DS1830U+T&R IC SUPERVISOR 3 CHANNEL 8UMAX 2,552 $1.9890 In Stock
DS1830AS+T&R IC SUPERVISOR 3 CHANNEL 8SOIC 2,628 $1.9240 In Stock
DS1830S+T&R IC SUPERVISOR 3 CHANNEL 8SOIC 2,906 $1.7420 In Stock
DS1830AS/T&R IC SUPERVISOR 3 CHANNEL 8SOIC 1,169 RFQ In Stock
DS1830BU/T&R IC SUPERVISOR 3 CHANNEL 8UMAX 2,502 RFQ In Stock
DS1830BU IC SUPERVISOR 3 CHANNEL 8UMAX 3,887 RFQ In Stock
DS1830 IC SUPERVISOR 3 CHANNEL 8DIP 2,163 RFQ In Stock
DS1830B IC SUPERVISOR 3 CHANNEL 8DIP 4,860 RFQ In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

DS1830AU+T&R Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Type Sequencer
Number of Voltages Monitored 3
Voltage - Threshold 3.3V
Output Open Drain or Open Collector
Reset Active Low
Reset Timeout 10ms; 20ms; 50ms Minimum
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-uMAX

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need DS1830AU+T&R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.