DS1806-050 Maxim Integrated component image

DS1806-050

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC DGTL POT 50KOHM 64TAP 20DIP

Listed in Data Acquisition - Digital Potentiometers

2,214 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DS1806-050?

DS1806-050 is a ic dgtl pot 50kohm 64tap 20dip, featuring the 20-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 2.7V ~ 5.5V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
DS1806E-100+T&R IC DGT POT 100KOHM 64TAP 20TSSOP 620 RFQ In Stock
DS1806S-100/T&R IC DGTL POT 100KOHM 64TAP 20SOIC 2,274 RFQ In Stock
DS1806S-050 IC DGTL POT 50KOHM 64TAP 20SOIC 3,387 RFQ In Stock
DS1806E-050+T&R IC DGTL POT 50KOHM 64TAP 20TSSOP 817 $6.4220 In Stock
DS1806E-010+ IC DGTL POT 10KOHM 64TAP 20TSSOP 620 $8.5200 In Stock
DS1806E-050+ IC DGTL POT 50KOHM 64TAP 20TSSOP 695 $7.6600 In Stock
DS1806E-100+ IC DGT POT 100KOHM 64TAP 20TSSOP 632 $8.5200 In Stock
DS1806E-100/T&R IC DGT POT 100KOHM 64TAP 20TSSOP 2,172 RFQ In Stock
DS1806S-050/T&R IC DGTL POT 50KOHM 64TAP 20SOIC 4,467 RFQ In Stock
DS1806E-050/T&R IC DGTL POT 50KOHM 64TAP 20TSSOP 4,596 RFQ In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

DS1806-050 Specifications

Series -
Package Tube
Part Status Obsolete
Taper Linear
Configuration Potentiometer
Number of Circuits 6
Number of Taps 64
Resistance (Ohms) 50k
Interface Serial
Memory Type Volatile
Voltage - Supply 2.7V ~ 5.5V
Features Cascade Pin
Tolerance ±20%
Temperature Coefficient (Typ) 750ppm/°C
Mounting Type Through Hole
Supplier Device Package 20-PDIP
Package / Case 20-DIP (0.300", 7.62mm)
Operating Temperature -40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ) 400

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
DS1844-050 DS1844 QUAD DIGIPOT 1,572 $3.2800 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need DS1806-050 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.