DPAD50 TO-72 4L Linear Integrated Systems, Inc. component image

DPAD50 TO-72 4L

In Stock

Linear Integrated Systems, Inc. logo Linear Integrated Systems, Inc. · franchised distributor

LOW LEAKAGE, MONOLITHIC DUAL, PI

Listed in Diodes - Rectifiers - Arrays

883 pcs in stock ships same day before 6pm

from $5.9400

Quantity Unit Price
1+ $5.9400 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DPAD50 TO-72 4L?

DPAD50-TO-72-4L is a low leakage, monolithic dual, pi, featuring the TO-206AF, TO-72-4 Metal Can case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Linear Integrated Systems, Inc. Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
DPAD2 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 994 $5.1900 In Stock
SSTDPAD100 SOIC 8L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,326 $3.8800 In Stock
DPAD5 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,011 $5.1900 In Stock
DPAD1 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,056 $4.9500 In Stock
DPAD100 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 908 $5.8100 In Stock
DPAD10 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,031 $5.0600 In Stock
SSTDPAD5 SOIC 8L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,098 $4.7500 In Stock
DPAD20 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,071 $4.8800 In Stock
DPAD1 TO-78 5L LOW LEAKAGE, MONOLITHIC DUAL, PI 948 $5.5000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

DPAD50 TO-72 4L Specifications

Series DPAD
Package Bulk
Part Status Active
Diode Configuration 2 Independent
Diode Type Standard
Voltage - DC Reverse (Vr) (Max) 45 V
Current - Average Rectified (Io) (per Diode) 50mA
Voltage - Forward (Vf) (Max) @ If 1.5 V @ 1 mA
Speed Small Signal =< 200mA (Io), Any Speed
Reverse Recovery Time (trr) -
Current - Reverse Leakage @ Vr 50 pA @ 20 V
Operating Temperature - Junction -55°C ~ 150°C
Mounting Type Through Hole
Package / Case TO-206AF, TO-72-4 Metal Can
Supplier Device Package TO-72-4

Buying Guide

Choosing Discrete Semiconductor Products

Qualifying a discrete semiconductor means checking worst-case, not typical, numbers. For diodes: reverse voltage at maximum temperature, forward drop at your actual current, and surge rating for inrush events. For BJTs: collector current and power at the real heatsink conditions, gain (hFE) at your operating current — the minimum column, not typical — and saturation voltage for switching duty. For MOSFETs: Rds(on) at your junction temperature (it roughly doubles from 25°C to 100°C) and gate threshold vs your drive voltage; logic-level parts need 4.5 V rating for 5 V drive. Always verify the safe operating area (SOA) curve for linear applications, and derate reverse voltage 20–30% for reliability. For ESD-exposed nodes, add TVS devices rated below the protected pin's absolute maximum.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
DPAD20 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,071 $4.8800 100%
DPAD10 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,031 $5.0600 100%
DPAD100 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 908 $5.8100 100%
DPAD1 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,056 $4.9500 100%
DPAD5 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 1,011 $5.1900 100%
DPAD2 TO-72 4L LOW LEAKAGE, MONOLITHIC DUAL, PI 994 $5.1900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Linear Integrated Systems, Inc. Parts in Stock

Request a Quote

Need DPAD50 TO-72 4L or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.