DG407CWI+T Maxim Integrated component image

DG407CWI+T

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC MULTIPLEXER DUAL 8X1 28SOIC

Listed in Interface - Analog Switches, Multiplexers, Demultiplexers

879 pcs in stock ships same day before 6pm

from $5.3083

Quantity Unit Price
1 - 999 $6.0190
1,000+ $5.3083 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DG407CWI+T?

DG407CWI-T is a ic multiplexer dual 8x1 28soic, featuring the 28-SOIC (0.295", 7.50mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

20 variants of this series in stock
Part Number Description Stock Unit Price Status
DG407EWI+T IC MULTIPLEXER DUAL 8X1 28SOIC 593 $9.1520 In Stock
DG406EWI+ IC MULTIPLEXER 16X1 28SOIC 380 $14.8700 In Stock
DG406DJ+ IC MULTIPLEXER 16X1 28DIP 433 $12.9000 In Stock
DG406EUI IC MULTIPLEXER 16X1 28-TSSOP 3,734 RFQ In Stock
DG406DN+T IC MULTIPLEXER 16X1 28PLCC 594 $9.1520 In Stock
DG406DN+ IC MULTIPLEXER 16X1 28PLCC 411 $13.4000 In Stock
DG407DN+T IC MULTIPLEXER DUAL 8X1 28PLCC 585 $9.1520 In Stock
DG407CJ IC MUX ANLG DIFF 8CH CMOS 28-DIP 4,096 RFQ In Stock
DG406EUI+T IC MULTIPLEXER 16X1 28TSSOP 662 $7.9820 In Stock
DG407CWI+ IC MULTIPLEXER DUAL 8X1 28SOIC 549 $9.9600 In Stock
+ 10 more variants in stock — browse the full category

Technical Parameters

DG407CWI+T Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Switch Circuit -
Multiplexer/Demultiplexer Circuit 8:1
Number of Circuits 2
On-State Resistance (Max) 100Ohm
Channel-to-Channel Matching (ΔRon) 1.5Ohm
Voltage - Supply, Single (V+) 5V ~ 30V
Voltage - Supply, Dual (V±) ±4.5V ~ 20V
Switch Time (Ton, Toff) (Max) 200ns, 150ns
-3db Bandwidth -
Charge Injection 2pC
Channel Capacitance (CS(off), CD(off)) 8pF, 65pF
Current - Leakage (IS(off)) (Max) 500pA
Crosstalk -92dB @ 100kHz
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295", 7.50mm Width)
Supplier Device Package 28-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
DG407CWI IC MULTIPLEXER DUAL 8X1 28SOIC 2,140 RFQ 100%
DG407EWI+ IC MULTIPLEXER DUAL 8X1 28SOIC 369 $14.8700 100%
MAX307EWI+T IC MULTIPLEXER DUAL 8X1 28SOIC 414 $13.3380 100%
MAX307EWI+ IC MULTIPLEXER DUAL 8X1 28SOIC 381 $14.9300 100%
MAX307CWI+ IC MULTIPLEXER DUAL 8X1 28SOIC 443 $12.4100 100%
MAX307CWI+T IC MULTIPLEXER DUAL 8X1 28SOIC 456 $11.8200 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need DG407CWI+T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.