DCE10I-2451-RMMXP Laird - Antennas component image

DCE10I-2451-RMMXP

In Stock

Laird - Antennas logo Laird - Antennas · franchised distributor

RF ANT 2.4GHZ/5GHZ PANEL CAB 8"

Listed in RF Antennas

84 pcs in stock ships same day before 6pm

from $105.6500

Quantity Unit Price
1+ $105.6500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DCE10I-2451-RMMXP?

DCE10I-2451-RMMXP is a rf ant 2.4ghz/5ghz panel cab 8", featuring a max power of 100 W. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Antennas Series Variants in Stock

34 variants of this series in stock
Part Number Description Stock Unit Price Status
DCE10I-2416-MCM RF ANT 2.6GHZ PANEL CAB BRKT 8" 85 $96.6000 In Stock
DCE10I-4919-UFL RF ANT 5.4GHZ PANEL CAB BRKT 8" 94 $96.6000 In Stock
DCE10I-2416-RSMAM RF ANT 2.6GHZ PANEL CAB BRKT 8" 84 $96.6000 In Stock
DCE10I-4919-FSMF RF ANT 5.4GHZ PANEL CAB BRKT MT 97 $96.6000 In Stock
DCE10I-2451-FSMF RF ANT 2.4GHZ/5GHZ PANEL BRKT MT 86 $105.6500 In Stock
DCE10I-2416-UFL RF ANT 2.6GHZ PANEL CAB BRKT 8" 89 $96.6000 In Stock
DCE10I-2416-FSMF RF ANT 2.6GHZ PANEL CAB BRKT MT 95 $92.0700 In Stock
DCE10D-4924-NF RF ANT 5.4GHZ PANEL N FEM BRKT 3,147 RFQ In Stock
DCE10I-985-RMMXP RF ANT 900MHZ PANEL CAB BRKT MT 82 $96.6000 In Stock
DCE10I-4919-RSMAM RF ANT 5.4GHZ PANEL CAB BRKT 8" 86 $96.6000 In Stock
+ 24 more variants in stock — browse the full category

Technical Parameters

DCE10I-2451-RMMXP Specifications

Series HD RooTenna®
Package Bulk
Part Status Active
RF Family/Standard WiFi
Frequency Group UHF (2GHz ~ 3GHz), SHF (f > 4GHz)
Frequency (Center/Band) 2.4GHz, 5GHz
Frequency Range 2.4GHz ~ 2.485GHz, 4.9GHz ~ 5.85GHz
Antenna Type Panel
Number of Bands 2
VSWR 2, 1.7
Return Loss -
Gain 12dBi, 19dBi
Power - Max 100 W
Features Cable - 203mm
Termination RP-MMX Female
Ingress Protection IP67
Mounting Type Bracket Mount
Height (Max) 3.898" (99.00mm)
Applications Wi-Fi, WiMax™, WLAN

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Antennas Parts in Stock

Request a Quote

Need DCE10I-2451-RMMXP or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.