CW0101R100JE12HS Vishay / Dale component image

CW0101R100JE12HS

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 1.1 OHM 13W 5% AXIAL

Listed in Through Hole Resistors

2,514 pcs in stock ships same day before 6pm

from $1.2172

Quantity Unit Price
1 - 99 $2.0286
100 - 299 $2.0286
300 - 499 $1.7388
500 - 999 $1.4490
1,000 - 4,999 $1.2558
5,000+ $1.2172 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CW0101R100JE12HS?

CW0101R100JE12HS is a res 1.1 ohm 13w 5% axial, featuring a power rating of 13W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CW02BR4700JE70HS RES 0.47 OHM 3.75W 5% AXIAL 9,209 $0.5453 In Stock
CW0011K500JE70HS RES 1.5K OHM 5% AXIAL 9,775 $0.5134 In Stock
CW010R1100JE73HS RES 0.11 OHM 13W 5% AXIAL 4,056 $1.2480 In Stock
CW02B430R0JE70HS RES 430 OHM 3.75W 5% AXIAL 10,590 $0.4735 In Stock
CW02BR2000JE70HS RES 0.2 OHM 3.75W 5% AXIAL 9,215 $0.5453 In Stock
CW005R1800JE12HS RES 0.18 OHM 6.5W 5% AXIAL 2,498 $2.0313 In Stock
CW02B6K800JE70HS RES 6.8K OHM 3.75W 5% AXIAL 9,321 $0.5387 In Stock
CW00120R00JE70HS RES 20 OHM 5% AXIAL 11,119 $0.4509 In Stock
CW0102K000JE12HS RES 2K OHM 13W 5% AXIAL 2,690 $1.8870 In Stock
CW0011K100JE12HS RES 1.1K OHM 5% AXIAL 3,328 $1.5225 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CW0101R100JE12HS Specifications

Series CW
Package Bulk
Part Status Active
Resistance 1.1 Ohms
Tolerance ±5%
Power (Watts) 13W
Composition Wirewound
Features Moisture Resistant, Pulse Withstanding
Temperature Coefficient ±50ppm/°C
Operating Temperature -65°C ~ 350°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.375" Dia x 1.781" L (9.52mm x 45.24mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW0051R100JE12HS RES 1.1 OHM 6.5W 5% AXIAL 2,618 $1.9388 67%
WW12JT1R10 RES 1.1 OHM 0.4W 5% AXIAL 18,927 $0.2647 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CW0101R100JE12HS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.