CS8361YDPS7 Sanyo Semiconductor/ON Semiconductor component image

CS8361YDPS7

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC REG LIN 5V 100MA/250MA D2PAK

Listed in PMIC - Voltage Regulators - Linear

3,188 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CS8361YDPS7?

CS8361YDPS7 is a ic reg lin 5v 100ma/250ma d2pak, featuring the TO-263-8, D²Pak (7 Leads + Tab), TO-263CA package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
CS8361YDWF16G IC REG LIN 5V 100MA/250MA 16SOIC 4,553 RFQ In Stock
CS8361YDPSR7 IC REG LIN 5V 100MA/250MA D2PAK 4,177 RFQ In Stock
CS8361YDWFR16G IC REG LIN 5V 100MA/250MA 16SOIC 2,941 RFQ In Stock
CS8361YDWFR16 IC REG LIN 5V 100MA/250MA 16SOIC 2,673 RFQ In Stock
CS8361YDPSR7G IC REG LIN 5V 100MA/250MA D2PAK 1,453 $3.5200 In Stock
CS8361YDPS7G IC REG LIN 5V 100MA/250MA D2PAK 3,052 RFQ In Stock
CS8361YDWF16 IC REG LIN 5V 100MA/250MA 16SOIC 2,833 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CS8361YDPS7 Specifications

Series -
Package Tube
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 2
Voltage - Input (Max) 26V
Voltage - Output (Min/Fixed) 5V, Tracking
Voltage - Output (Max) -
Voltage Dropout (Max) 0.6V @ 100mA, 0.7V @ 250mA
Current - Output 100mA, 250mA
Current - Quiescent (Iq) 200 µA
Current - Supply (Max) 50 mA
PSRR 70dB (120Hz)
Control Features Enable, Reset
Protection Features Over Temperature, Over Voltage, Reverse Polarity, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-263-8, D²Pak (7 Leads + Tab), TO-263CA
Supplier Device Package D2PAK-7

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need CS8361YDPS7 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.