CPWN0775R00JB14 Vishay / Dale component image

CPWN0775R00JB14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 75 OHM 7W 5% AXIAL

Listed in Through Hole Resistors

530 pcs in stock ships same day before 6pm

from $6.2000

Quantity Unit Price
1 - 9 $10.0000
10 - 24 $10.0000
25 - 49 $9.0000
50 - 99 $7.7500
100 - 249 $7.1250
250 - 499 $6.7500
500 - 999 $6.5000
1,000+ $6.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPWN0775R00JB14?

CPWN0775R00JB14 is a res 75 ohm 7w 5% axial, featuring a power rating of 7W, a tolerance of ±5%, a Wirewound composition, and the Axial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPW03R4000FB143 RES 0.4 OHM 3W 1% AXIAL 533 $10.0000 In Stock
CPW10680R0KB14 RES 680 OHM 10W 10% AXIAL 100 $80.0000 In Stock
CPW1510R00FE14 RES 10 OHM 15W 1% AXIAL 111 $80.0000 In Stock
CPW10750R0JB14 RES 750 OHM 10W 5% AXIAL 97 $80.0000 In Stock
CPW05510R0FE143 RES 510 OHM 5W 1% AXIAL 541 $10.0000 In Stock
CPW1530R00JB143 RES 30 OHM 15W 5% AXIAL 108 $80.0000 In Stock
CPW055K600JE14 RES 5.6K OHM 5W 5% AXIAL 535 $10.0000 In Stock
CPW1510K00JE14 RES 10K OHM 15W 5% AXIAL 110 $80.0000 In Stock
CPW20130R0JB14 RES 130 OHM 20W 5% AXIAL 107 $80.0000 In Stock
CPW202K200JE14 RES 2.2K OHM 20W 5% AXIAL 97 $80.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPWN0775R00JB14 Specifications

Series CPWN
Package Bulk
Part Status Active
Resistance 75 Ohms
Tolerance ±5%
Power (Watts) 7W
Composition Wirewound
Features Flame Proof, Non-Inductive, Pulse Withstanding, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 1.391" L x 0.375" W (35.32mm x 9.52mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPW0575R00JB143 RES 75 OHM 5W 5% AXIAL 545 $10.0000 84%
25J75R RES 75 OHM 5% 5W AXIAL 3,638 $1.3860 84%
RWR84N75R0FRB12 RES 75 OHM 7W 1% WW AXIAL 314 $18.7825 75%
CW01075R00JS73 RES 75 OHM 13W 5% AXIAL 4,644 $1.0875 70%
CW01075R00JB12 RES 75 OHM 13W 5% AXIAL 2,617 $1.9446 70%
CW01075R00JE12HS RES 75 OHM 13W 5% AXIAL 2,501 $2.0286 70%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPWN0775R00JB14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.