CPWN0520R00FE14 Vishay / Dale component image

CPWN0520R00FE14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 20 OHM 5W 1% AXIAL

Listed in Through Hole Resistors

533 pcs in stock ships same day before 6pm

from $6.2000

Quantity Unit Price
1 - 9 $10.0000
10 - 24 $10.0000
25 - 49 $9.0000
50 - 99 $7.7500
100 - 249 $7.1250
250 - 499 $6.7500
500 - 999 $6.5000
1,000+ $6.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPWN0520R00FE14?

CPWN0520R00FE14 is a res 20 ohm 5w 1% axial, featuring a power rating of 5W, a tolerance of ±1%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPW03R4000FB143 RES 0.4 OHM 3W 1% AXIAL 533 $10.0000 In Stock
CPW10680R0KB14 RES 680 OHM 10W 10% AXIAL 100 $80.0000 In Stock
CPW1510R00FE14 RES 10 OHM 15W 1% AXIAL 111 $80.0000 In Stock
CPW10750R0JB14 RES 750 OHM 10W 5% AXIAL 97 $80.0000 In Stock
CPW05510R0FE143 RES 510 OHM 5W 1% AXIAL 541 $10.0000 In Stock
CPW1530R00JB143 RES 30 OHM 15W 5% AXIAL 108 $80.0000 In Stock
CPW055K600JE14 RES 5.6K OHM 5W 5% AXIAL 535 $10.0000 In Stock
CPW1510K00JE14 RES 10K OHM 15W 5% AXIAL 110 $80.0000 In Stock
CPW20130R0JB14 RES 130 OHM 20W 5% AXIAL 107 $80.0000 In Stock
CPW202K200JE14 RES 2.2K OHM 20W 5% AXIAL 97 $80.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPWN0520R00FE14 Specifications

Series CPWN
Package Bulk
Part Status Active
Resistance 20 Ohms
Tolerance ±1%
Power (Watts) 5W
Composition Wirewound
Features Flame Proof, Non-Inductive, Pulse Withstanding, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.875" L x 0.375" W (22.22mm x 9.52mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPW0520R00FB143 RES 20 OHM 5W 1% AXIAL 546 $10.0000 100%
RWR74N20R0FRS73 RES 20 OHM 5W 1% WW AXIAL 810 $6.4665 100%
CPW0220R00FB14 RES 20 OHM 2W 1% AXIAL 544 $10.0000 67%
CW02B20R00JE70 RES 20 OHM 3.75W 5% AXIAL 13,412 $0.3737 61%
CW02B20R00JS70 RES 20 OHM 3.75W 5% AXIAL 12,161 $0.4123 61%
RWR84S20R0BSB12 RES 20 OHM 7W 0.1% WW AXIAL 149 $47.6140 59%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPWN0520R00FE14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.