CPWN05100R0JB14 Vishay / Dale component image

CPWN05100R0JB14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 100 OHM 5W 5% AXIAL

Listed in Through Hole Resistors

546 pcs in stock ships same day before 6pm

from $6.2000

Quantity Unit Price
1 - 9 $10.0000
10 - 24 $10.0000
25 - 49 $9.0000
50 - 99 $7.7500
100 - 249 $7.1250
250 - 499 $6.7500
500 - 999 $6.5000
1,000+ $6.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPWN05100R0JB14?

CPWN05100R0JB14 is a res 100 ohm 5w 5% axial, featuring a power rating of 5W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPW03R4000FB143 RES 0.4 OHM 3W 1% AXIAL 533 $10.0000 In Stock
CPW10680R0KB14 RES 680 OHM 10W 10% AXIAL 100 $80.0000 In Stock
CPW1510R00FE14 RES 10 OHM 15W 1% AXIAL 111 $80.0000 In Stock
CPW10750R0JB14 RES 750 OHM 10W 5% AXIAL 97 $80.0000 In Stock
CPW05510R0FE143 RES 510 OHM 5W 1% AXIAL 541 $10.0000 In Stock
CPW1530R00JB143 RES 30 OHM 15W 5% AXIAL 108 $80.0000 In Stock
CPW055K600JE14 RES 5.6K OHM 5W 5% AXIAL 535 $10.0000 In Stock
CPW1510K00JE14 RES 10K OHM 15W 5% AXIAL 110 $80.0000 In Stock
CPW20130R0JB14 RES 130 OHM 20W 5% AXIAL 107 $80.0000 In Stock
CPW202K200JE14 RES 2.2K OHM 20W 5% AXIAL 97 $80.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPWN05100R0JB14 Specifications

Series CPWN
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 5W
Composition Wirewound
Features Flame Proof, Non-Inductive, Pulse Withstanding, Safety
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.875" L x 0.375" W (22.22mm x 9.52mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
5WR110 RES-5W 100 OHM 5% 7,511 $0.6700 100%
CW02B100R0JE70HS RES 100 OHM 3.75W 5% AXIAL 10,606 $0.4735 86%
CW02C100R0JE70 RES 100 OHM 3.25W 5% AXIAL 13,424 $0.3737 79%
53J100E RES 100 OHM 3W 5% AXIAL 20,038 $0.2500 75%
RWR74N1000FRB12 RES 100 OHM 5W 1% WW AXIAL 732 $7.1250 75%
CW010100R0JB123 RES 100 OHM 13W 5% AXIAL 2,607 $1.9446 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPWN05100R0JB14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.