CPW103R010FE31 Vishay / Dale component image

CPW103R010FE31

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 3.01 OHM 10W 1% AXIAL

Listed in Through Hole Resistors

2,291 pcs in stock ships same day before 6pm

from $1.4748

Quantity Unit Price
1 - 99 $2.2182
100 - 249 $2.2182
250 - 499 $1.9184
500 - 999 $1.7386
1,000 - 4,999 $1.5287
5,000+ $1.4748 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPW103R010FE31?

CPW103R010FE31 is a res 3.01 ohm 10w 1% axial, featuring a power rating of 10W, a tolerance of ±1%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPW03R4000FB143 RES 0.4 OHM 3W 1% AXIAL 533 $10.0000 In Stock
CPW10680R0KB14 RES 680 OHM 10W 10% AXIAL 100 $80.0000 In Stock
CPW1510R00FE14 RES 10 OHM 15W 1% AXIAL 111 $80.0000 In Stock
CPW10750R0JB14 RES 750 OHM 10W 5% AXIAL 97 $80.0000 In Stock
CPW05510R0FE143 RES 510 OHM 5W 1% AXIAL 541 $10.0000 In Stock
CPW1530R00JB143 RES 30 OHM 15W 5% AXIAL 108 $80.0000 In Stock
CPW055K600JE14 RES 5.6K OHM 5W 5% AXIAL 535 $10.0000 In Stock
CPW1510K00JE14 RES 10K OHM 15W 5% AXIAL 110 $80.0000 In Stock
CPW20130R0JB14 RES 130 OHM 20W 5% AXIAL 107 $80.0000 In Stock
CPW202K200JE14 RES 2.2K OHM 20W 5% AXIAL 97 $80.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPW103R010FE31 Specifications

Series CPW
Package Bulk
Part Status Active
Resistance 3.01 Ohms
Tolerance ±1%
Power (Watts) 10W
Composition Wirewound
Features Flame Proof, Pulse Withstanding, Safety
Temperature Coefficient ±50ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 1.875" L x 0.375" W (47.62mm x 9.52mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
RWR89S3R01FRS70 RES 3.01 OHM 3W 1% WW AXIAL 1,346 $3.8570 67%
RWR80N3R01FRS73 RES 3.01 OHM 2W 1% WW AXIAL 793 $6.6766 67%
RWR71S3R01FMB12 RES 3.01 OHM 2W 1% WW AXIAL 990 $5.2480 67%
RWR80S3R01FRRSL RES 3.01 OHM 2W 1% WW AXIAL 770 $6.9120 67%
RWR81N3R01FSRSL RES 3.01 OHM 1W 1% WW AXIAL 492 $11.0040 67%
RWR80N3R01FSB12 RES 3.01 OHM 2W 1% WW AXIAL 523 $10.4310 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPW103R010FE31 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.