CPR032R400KE14 Vishay / Dale component image

CPR032R400KE14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 2.4 OHM 3W 10% RADIAL

Listed in Through Hole Resistors

539 pcs in stock ships same day before 6pm

from $6.2000

Quantity Unit Price
1 - 9 $10.0000
10 - 29 $10.0000
30 - 49 $9.0000
50 - 99 $7.7500
100 - 249 $7.1250
250 - 499 $6.7500
500 - 999 $6.5000
1,000+ $6.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPR032R400KE14?

CPR032R400KE14 is a res 2.4 ohm 3w 10% radial, featuring a power rating of 3W, a tolerance of ±10%, a Wirewound composition, and the Radial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPR105R600JE10 RES 5.6 OHM 10W 5% RADIAL 404 $13.5000 In Stock
CPR031R500KE14 RES 1.5 OHM 3W 10% RADIAL 545 $10.0000 In Stock
CPR07110R0KE10 RES 110 OHM 7W 10% RADIAL 413 $13.5000 In Stock
CPR151R300JE10 RES 1.3 OHM 15W 5% RADIAL 418 $13.5000 In Stock
CPR0556R00JE14 RES 56 OHM 5W 5% RADIAL 549 $10.0000 In Stock
CPR1056R00KE10 RES 56 OHM 10W 10% RADIAL 415 $13.5000 In Stock
CPR07330R0KE10 RES 330 OHM 7W 10% RADIAL 411 $13.5000 In Stock
CPR2056R00JE10 RES 56 OHM 20W 5% RADIAL 403 $13.5000 In Stock
CPR15470R0KE10 RES 470 OHM 15W 10% RADIAL 405 $13.5000 In Stock
CPR0512R00KE31 RES 12 OHM 5W 10% RADIAL 3,223 $1.5750 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPR032R400KE14 Specifications

Series CPR
Package Bulk
Part Status Active
Resistance 2.4 Ohms
Tolerance ±10%
Power (Watts) 3W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±400ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Radial
Supplier Device Package Radial Lead
Size / Dimension 0.906" L x 0.375" W (23.00mm x 9.53mm)
Height - Seated (Max) 0.375" (9.53mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPR032R400KE31 RES 2.4 OHM 3W 10% RADIAL 3,220 $1.5750 100%
CPR032R200KE14 RES 2.2 OHM 3W 10% RADIAL 544 $10.0000 95%
CPR032R200KE31 RES 2.2 OHM 3W 10% RADIAL 3,224 $1.5750 95%
CPR032R700KE31 RES 2.7 OHM 3W 10% RADIAL 3,210 $1.5750 93%
CPR032R000KE31 RES 2 OHM 3W 10% RADIAL 3,209 $1.5750 89%
CPR032R000KE14 RES 2 OHM 3W 10% RADIAL 544 $10.0000 89%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPR032R400KE14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.