CPCL03R0500JB32 Vishay / Dale component image

CPCL03R0500JB32

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 0.05 OHM 3W 5% RADIAL

Listed in Through Hole Resistors

534 pcs in stock ships same day before 6pm

from $6.2000

Quantity Unit Price
1 - 9 $10.0000
10 - 24 $10.0000
25 - 49 $9.0000
50 - 99 $7.7500
100 - 249 $7.1250
250 - 499 $6.7500
500 - 999 $6.5000
1,000+ $6.2000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPCL03R0500JB32?

CPCL03R0500JB32 is a res 0.05 ohm 3w 5% radial, featuring a power rating of 3W, a tolerance of ±5%, a Wirewound composition, and the Radial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPCL10R0500JB31 RES 0.05 OHM 10W 5% RADIAL 2,692 $1.8870 In Stock
CPCL05R0220JB32 RES 0.022 OHM 5W 5% RADIAL 530 $10.0000 In Stock
CPCL10R0900JE32 RES 0.09 OHM 10W 5% RADIAL 549 $10.0000 In Stock
CPCL10R0250JE32 RES 0.025 OHM 10W 5% RADIAL 535 $10.0000 In Stock
CPCL05R1000JB31 RES 0.1 OHM 5W 5% RADIAL 2,675 $1.8900 In Stock
CPCL05R0200HB31 RES 0.02 OHM 5W 3% RADIAL 2,032 $2.4975 In Stock
CPCL10R0510JB32 RES 0.051 OHM 10W 5% RADIAL 540 $10.0000 In Stock
CPCP05100R0FE32 RES 100 OHM 5W 1% RADIAL 538 $10.0000 In Stock
CPCL05R0540HB31 RES 0.054 OHM 5W 3% RADIAL 2,049 $2.4975 In Stock
CPCL02R0500JB32 RES 0.05 OHM 2W 5% RADIAL 530 $10.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPCL03R0500JB32 Specifications

Series CPCL
Package Bulk
Part Status Last Time Buy
Resistance 50 mOhms
Tolerance ±5%
Power (Watts) 3W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±100ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Radial
Supplier Device Package -
Size / Dimension 0.472" L x 0.315" W (12.00mm x 8.00mm)
Height - Seated (Max) 0.984" (24.99mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPCL03R0500JE32 RES 0.05 OHM 3W 5% RADIAL 531 $10.0000 100%
CPCL03R1000JB32 RES 0.1 OHM 3W 5% RADIAL 530 $10.0000 58%
CPCL03R1000JB31 RES 0.1 OHM 3W 5% RADIAL 2,679 $1.8900 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPCL03R0500JB32 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.