CPCC10R5000KB31 Vishay / Dale component image

CPCC10R5000KB31

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 0.5 OHM 10W 10% RADIAL

Listed in Through Hole Resistors

2,683 pcs in stock ships same day before 6pm

from $1.2546

Quantity Unit Price
1 - 99 $1.8870
100 - 249 $1.8870
250 - 499 $1.6320
500 - 999 $1.4790
1,000 - 4,999 $1.3005
5,000+ $1.2546 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CPCC10R5000KB31?

CPCC10R5000KB31 is a res 0.5 ohm 10w 10% radial, featuring a power rating of 10W, a tolerance of ±10%, a Wirewound composition, and the Radial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CPCP03560R0FB31 RES 560 OHM 3W 1% RADIAL 2,642 $1.9166 In Stock
CPCC025R100JB31 RES 5.1 OHM 2W 5% RADIAL 2,688 $1.8900 In Stock
CPCC054R300JE32 RES 4.3 OHM 5W 5% RADIAL 539 $10.0000 In Stock
CPCP03R2000FB31 RES 0.2 OHM 3W 1% RADIAL 2,643 $1.9166 In Stock
CPCF0339K00JB32 RES 39K OHM 3W 5% RADIAL 532 $10.0000 In Stock
CPCF0568K00KB32 RES 68K OHM 5W 10% RADIAL 541 $10.0000 In Stock
CPCF0510K00KB31 RES 10K OHM 5W 10% RADIAL 2,686 $1.8900 In Stock
CPCC10470R0JE32 RES 470 OHM 10W 5% RADIAL 535 $10.0000 In Stock
CPCC032R000KB32 RES 2 OHM 3W 10% RADIAL 537 $10.0000 In Stock
CPCF0550K00JB32 RES 50K OHM 5W 5% RADIAL 541 $10.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CPCC10R5000KB31 Specifications

Series CPCC
Package Bulk
Part Status Active
Resistance 500 mOhms
Tolerance ±10%
Power (Watts) 10W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±600ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Radial
Supplier Device Package -
Size / Dimension 0.633" L x 0.485" W (16.08mm x 12.32mm)
Height - Seated (Max) 1.372" (34.85mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CPCC10R5000KB32 RES 0.5 OHM 10W 10% RADIAL 545 $10.0000 100%
CPCC10R6800KB32 RES 0.68 OHM 10W 10% RADIAL 531 $10.0000 82%
CPCC10R6800KB31 RES 0.68 OHM 10W 10% RADIAL 2,695 $1.8870 82%
CPCC10R4700JB32 RES 0.47 OHM 10W 5% RADIAL 546 $10.0000 81%
CPCC10R4700JB31 RES 0.47 OHM 10W 5% RADIAL 2,693 $1.8870 81%
CPCC10R5600JE32 RES 0.56 OHM 10W 5% RADIAL 548 $10.0000 77%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CPCC10R5000KB31 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.