CP0805A0902CWTR Elco (AVX) component image

CP0805A0902CWTR

In Stock

Elco (AVX) logo Elco (AVX) · franchised distributor

RF DIR COUPLER 890-915MHZ 0805

Listed in RF Directional Coupler

13,383 pcs in stock ships same day before 6pm

from $0.3750

Quantity Unit Price
1 - 2,999 $0.3750 BEST
3,000+ $0.3750 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CP0805A0902CWTR?

CP0805A0902CWTR is a rf dir coupler 890-915mhz 0805, featuring a frequency of 890MHz ~ 915MHz, a max power of 3W, an insertion loss of 0.5dB, and a Standard coupler. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Elco (AVX) Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CP0805B2442BSTR RF DIR COUPLER 2.4-2.484GHZ 0805 10,462 $0.4800 In Stock
CP0805B0881AWTR RF DIR COUPLER 869-894MHZ 0805 13,380 $0.3750 In Stock
CP0805B1842CWTR RF DIR COUPLR 1.805-1.88GHZ 0805 13,365 $0.3750 In Stock
CP0805A1975AWTR RF DIR COUPLER 1.975GHZ 0805 13,368 $0.3750 In Stock
CP0805A0947BWTR RF DIR COUPLER 935-960MHZ 0805 13,381 $0.3750 In Stock
CP0805A0836BWTR RF DIR COUPLER 824-849MHZ 0805 13,369 $0.3750 In Stock
CP0805A1747CWTR RF DIR COUPLR 1.71-1.785GHZ 0805 13,376 $0.3750 In Stock
CP0805A1615BWTR RF DIR COUPLER 1.615GHZ 0805 13,373 $0.3750 In Stock
CP0805A1280BWTR RF DIR COUPLER 1.28GHZ 0805 13,370 $0.3750 In Stock
CP0805B1441AWTR RF DIR COUPL 1.429-1.453GHZ 0805 13,380 $0.3750 In Stock
More variants of this series in stock — browse the full category

Part Number Logic · AVX

Reading CP0805A0902CWTR

CP Series— Ceramic EMI filter (AVX)
0805 Case— 0805

Full ordering code structure for every value in this series is covered in the datasheet's Ordering Information section.

Technical Parameters

CP0805A0902CWTR Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Coupler Type Standard
Frequency 890MHz ~ 915MHz
Coupling Factor 13.5 ± 1dB
Applications GSM
Insertion Loss 0.5dB
Power - Max 3W
Isolation -20dB
Return Loss -23dB
Package / Case 0805 (2012 Metric)
Supplier Device Package 0805

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CP0805A0881CWTR RF DIR COUPLER 869-894MHZ 0805 13,379 $0.3750 99%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Elco (AVX) Parts in Stock

Request a Quote

Need CP0805A0902CWTR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.