CP001032R00KB14 Vishay / Dale component image

CP001032R00KB14

In Stock

Vishay / Dale logo Vishay / Dale · franchised distributor

RES 32 OHM 10W 10% AXIAL

Listed in Through Hole Resistors

307 pcs in stock ships same day before 6pm

from $12.5000

Quantity Unit Price
1 - 4 $19.0000
5 - 9 $19.0000
10 - 24 $16.6000
25 - 49 $15.0000
50 - 99 $14.2500
100 - 249 $13.7500
250 - 499 $13.0000
500+ $12.5000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CP001032R00KB14?

CP001032R00KB14 is a res 32 ohm 10w 10% axial, featuring a power rating of 10W, a tolerance of ±10%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Vishay / Dale Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CP0002100R0JE14 RES 100 OHM 2W 5% AXIAL 549 $10.0000 In Stock
CP000210R00KJ01 RES 10 OHM 2W 10% AXIAL 3,350 $1.5120 In Stock
CP0015100R0JB143 RES 100 OHM 15W 5% AXIAL 293 $19.0000 In Stock
CP0010820R0JB143 RES 820 OHM 10W 5% AXIAL 299 $19.0000 In Stock
CP000222R00KE143 RES 22 OHM 2W 10% AXIAL 539 $10.0000 In Stock
CP000520R00JB14 RES 20 OHM 5W 5% AXIAL 536 $10.0000 In Stock
CP00252R700JB14 RES 2.7 OHM 25W 5% AXIAL 310 $19.0000 In Stock
CP0002560R0JB14 RES 560 OHM 2W 5% AXIAL 549 $10.0000 In Stock
CP000511K50KB14 RES 11.5K OHM 5W 10% AXIAL 537 $10.0000 In Stock
CP000551R00JE143 RES 51 OHM 5W 5% AXIAL 535 $10.0000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CP001032R00KB14 Specifications

Series CP
Package Bulk
Part Status Active
Resistance 32 Ohms
Tolerance ±10%
Power (Watts) 10W
Composition Wirewound
Features Flame Proof, Safety
Temperature Coefficient ±300ppm/°C
Operating Temperature -65°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 1.890" L x 0.394" W (48.00mm x 10.00mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SQPW733RJ RES 33.0 OHM 7W 5% AXIAL 8,810 $0.5700 65%
CP000731R00JB14 RES 31 OHM 7W 5% AXIAL 550 $10.0000 65%
CP000731R00JB143 RES 31 OHM 7W 5% AXIAL 530 $10.0000 65%
CP002533R00KB14 RES 33 OHM 25W 10% AXIAL 303 $19.0000 65%
CP001532R20JB143 RES 32.2 OHM 15W 5% AXIAL 306 $19.0000 64%
NSP15AJB-30R RES WW 15W 5% AXIAL 11,113 $0.4512 61%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Vishay / Dale Parts in Stock

Request a Quote

Need CP001032R00KB14 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.