CD4024BPWR Texas Instruments component image

CD4024BPWR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC 7BIT BINARY COUNTER 14-TSSOP

Listed in Logic - Counters, Dividers

11,669 pcs in stock ships same day before 6pm

from $0.1256

Quantity Unit Price
1 - 1,999 $0.4300
2,000 - 5,999 $0.1442
6,000 - 9,999 $0.1349
10,000+ $0.1256 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CD4024BPWR?

CD4024BPWR is a ic 7bit binary counter 14-tssop, featuring the 14-TSSOP (0.173", 4.40mm Width) package, Surface Mount mounting, a supply range of 3 V ~ 18.0 V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

21 variants of this series in stock
Part Number Description Stock Unit Price Status
CD4040BNSR IC 12BIT BIN RIPPL COUNTER 16SO 10,246 $0.4900 In Stock
CD4040BPWR IC 12BIT BIN RIP COUNTER 16TSSOP 10,241 $0.4900 In Stock
CD4040BM96 IC 12BIT BIN RIPPL COUNTR 16SOIC 11,396 $0.4400 In Stock
CD4024BME4 IC COUNTER/DIVIDER BIN 14-SOIC 26,764 $0.1870 In Stock
CD4040BE IC 12BIT BIN RIPPL COUNTER 16DIP 8,379 $0.6000 In Stock
CD4024BM IC COUNTER/DIVIDER BIN 14-SOIC 9,660 $0.5200 In Stock
CD4024BMT IC COUNTER/DIVIDER BINRY 14-SOIC 5,088 $0.9900 In Stock
CD4040BM IC 12BIT BIN RIPPL COUNTR 16SOIC 8,965 $0.5600 In Stock
CD4024BPW IC COUNTER/DIVIDER BINRY 14TSSOP 9,664 $0.5200 In Stock
CD4024BE IC COUNTER/DIVIDER BINRY 14-DIP 9,303 $0.5400 In Stock
+ 11 more variants in stock — browse the full category

Technical Parameters

CD4024BPWR Specifications

Series 4000B
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Logic Type Binary Counter
Direction Up
Number of Elements 1
Number of Bits per Element 7
Reset Asynchronous
Timing -
Count Rate 24 MHz
Trigger Type Negative Edge
Voltage - Supply 3 V ~ 18.0 V
Operating Temperature -55°C ~ 125°C
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173", 4.40mm Width)
Supplier Device Package 14-TSSOP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need CD4024BPWR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.