CB20JB100R Stackpole Electronics, Inc. component image

CB20JB100R

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 100 OHM 20W 5% CERAMIC WW

Listed in Through Hole Resistors

13,911 pcs in stock ships same day before 6pm

from $0.3604

Quantity Unit Price
1 - 999 $0.3604 BEST
1,000+ $0.3604 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CB20JB100R?

CB20JB100R is a res 100 ohm 20w 5% ceramic ww, featuring a power rating of 20W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CB15JB110R RES 110 OHM 15W 5% CERAMIC WW 18,473 $0.2713 In Stock
CB5JBR250 RES 0.25 OHM 5W 5% CERAMIC WW 56,856 $0.0880 In Stock
CB7JB12R0 RES 12 OHM 7W 5% CERAMIC WW 37,347 $0.1340 In Stock
CB15JB18R0 RES 18 OHM 15W 5% CERAMIC WW 18,463 $0.2713 In Stock
CB15JB91R0 RES 91 OHM 15W 5% CERAMIC WW 18,460 $0.2713 In Stock
CB2JB30R0 RES 30 OHM 2W 5% CERAMIC WW 66,704 $0.0750 In Stock
CB2JB3R00 RES 3 OHM 2W 5% CERAMIC WW 66,708 $0.0750 In Stock
CB10JB120R RES 120 OHM 10W 5% CERAMIC WW 28,953 $0.1729 In Stock
CB10JBR300 RES 0.3 OHM 10W 5% CERAMIC WW 28,949 $0.1729 In Stock
CB5JB5R10 RES 5.1 OHM 5W 5% CERAMIC WW 10,030 $0.5000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CB20JB100R Specifications

Series CB
Package Bulk
Part Status Active
Resistance 100 Ohms
Tolerance ±5%
Power (Watts) 20W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 275°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 2.500" L x 0.500" W (63.50mm x 12.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CB5JB100R RES 100 OHM 5W 5% CERAMIC WW 10,043 $0.5000 67%
CB10JB100R RES 100 OHM 10W 5% CERAMIC WW 28,951 $0.1729 67%
FW20A1000JA RES 100 OHM 2W 5% AXIAL 38,869 $0.1288 67%
AC03000001000JACCS RES 100 OHM 3W 5% AXIAL 6,994 $0.7200 67%
C7100RJT RES 100 OHM 7W 5% AXIAL 7,397 $0.6794 67%
Z35092231000J6BC10 RES 100 OHM 6W 5% AXIAL 8,608 $0.5833 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need CB20JB100R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.