CAT25010LI-G Rochester Electronics component image

CAT25010LI-G

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC EEPROM 1KBIT SPI 20MHZ 8DIP

Listed in Memory

21,788 pcs in stock ships same day before 6pm

from $0.1764

Quantity Unit Price
1 - 9 $0.2300
10 - 99 $0.2271
100 - 499 $0.1865
500 - 999 $0.1813
1,000+ $0.1764 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CAT25010LI-G?

CAT25010LI-G is a ic eeprom 1kbit spi 20mhz 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting, a supply range of 1.8V ~ 5.5V. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Rochester Electronics Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
CAT25020LI-G IC EEPROM 2KBIT SPI 20MHZ 8DIP 20,049 $0.2500 In Stock
CAT25020VI-G IC EEPROM 2KBIT SPI 20MHZ 8SOIC 19,276 $0.2600 In Stock
CAT25010VI-G CAT25010 - 1-KBIT SPI SERIAL EEP 33,382 $0.1500 In Stock
CAT25010VI-GT3A IC EEPROM 1KBIT SPI 20MHZ 8SOIC 55,605 $0.0900 In Stock
CAT25020VE+GT3 IC EEPROM 2KBIT SPI 10MHZ 8SOIC 20,043 $0.2500 In Stock
CAT25010YGI IC EEPROM 1KBIT SPI 20MHZ 8TSSOP 41,705 $0.1200 In Stock
CAT25010YGI-T3 IC EEPROM 1KBIT SPI 20MHZ 8TSSOP 35,758 $0.1400 In Stock
CAT25020VI-GT3A IC EEPROM 2KBIT SPI 20MHZ 8SOIC 41,710 $0.1200 In Stock
CAT25020VGI-T3 IC EEPROM 2KBIT SPI 20MHZ 8SOIC 41,705 $0.1200 In Stock
CAT25010VGI-T3 IC EEPROM 1KBIT SPI 20MHZ 8SOIC 50,041 $0.1000 In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

CAT25010LI-G Specifications

Series -
Package Tube
Part Status Obsolete
Memory Type Non-Volatile
Memory Format EEPROM
Technology EEPROM
Memory Size 1Kb (128 x 8)
Memory Interface SPI
Clock Frequency 20 MHz
Write Cycle Time - Word, Page 5ms
Access Time -
Voltage - Supply 1.8V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
11AA010-I/P IC EEPROM 1KBIT SINGLE WIRE 8DIP 17,907 $0.2800 100%
25AA010A-I/P IC EEPROM 1KBIT SPI 10MHZ 8DIP 11,666 $0.4300 100%
24AA01-I/P IC EEPROM 1KBIT I2C 400KHZ 8DIP 19,260 $0.2600 97%
24AA014H-I/P IC EEPROM 1KBIT I2C 400KHZ 8DIP 15,192 $0.3300 97%
AT24C11-10PU-1.8 IC EEPROM 1KBIT I2C 1MHZ 8DIP 1,483 RFQ 100%
AT24C01A-10PU-1.8 IC EEPROM 1KBIT I2C 400KHZ 8DIP 3,775 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need CAT25010LI-G or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.