CAT1026WI-45-GT3 Sanyo Semiconductor/ON Semiconductor component image

CAT1026WI-45-GT3

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC SUPERVISOR 2 CHANNEL 8SOIC

Listed in PMIC - Supervisors

5,732 pcs in stock ships same day before 6pm

from $0.8775

Quantity Unit Price
1 - 2,999 $0.8775 BEST
3,000+ $0.8775 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CAT1026WI-45-GT3?

CAT1026WI-45-GT3 is a ic supervisor 2 channel 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

34 variants of this series in stock
Part Number Description Stock Unit Price Status
CAT1027LI-28-G IC SUPERVISOR 2 CHANNEL 8DIP 4,742 RFQ In Stock
CAT1026ZI-30-GT3 IC SUPERVISOR 2 CHANNEL 8MSOP 1,713 RFQ In Stock
CAT1026YI-25-GT3 IC SUPERVISOR 2 CHANNEL 8TSSOP 5,742 $0.8775 In Stock
CAT1027WI-45-GT3 IC SUPERVISOR 2 CHANNEL 8SOIC 5,745 $0.8775 In Stock
CAT1027YI-25-GT3 IC SUPERVISOR 2 CHANNEL 8TSSOP 5,747 $0.8775 In Stock
CAT1027LI-25-G IC SUPERVISOR 2 CHANNEL 8DIP 4,808 RFQ In Stock
CAT1027YI-28-GT3 IC SUPERVISOR 2 CHANNEL 8TSSOP 5,729 $0.8775 In Stock
CAT1027LI-45-G IC SUPERVISOR 2 CHANNEL 8DIP 2,711 RFQ In Stock
CAT1026ZI-28-GT3 IC SUPERVISOR 2 CHANNEL 8MSOP 2,780 RFQ In Stock
CAT1027LI-30-G IC SUPERVISOR 2 CHANNEL 8DIP 2,822 RFQ In Stock
+ 24 more variants in stock — browse the full category

Technical Parameters

CAT1026WI-45-GT3 Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Type Multi-Voltage Supervisor
Number of Voltages Monitored 2
Voltage - Threshold 4.5V, Adj
Output Open Drain or Open Collector
Reset Active High/Active Low
Reset Timeout 130ms Minimum
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need CAT1026WI-45-GT3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.