BMI-S-209-C Laird - Performance Materials component image

BMI-S-209-C

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

RF SHIELD 0.728"X1.156" SNAP FIT

Listed in RF Shields

3,399 pcs in stock ships same day before 6pm

from $0.5049

Quantity Unit Price
1 - 9 $1.4900
10 - 24 $1.3090
25 - 99 $1.1593
100 - 249 $1.0098
250 - 499 $0.8789
500 - 999 $0.7480
1,000 - 2,499 $0.5984
2,500 - 4,999 $0.5423
5,000+ $0.5049 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BMI-S-209-C?

BMI-S-209-C is a rf shield 0.728"x1.156" snap fit, featuring the Bulk package. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Laird - Performance Materials Series Variants in Stock

19 variants of this series in stock
Part Number Description Stock Unit Price Status
BMI-S-202-C RF SHIELD 0.668"X0.668" SNAP FIT 3,236 $1.5600 In Stock
BMI-S-201-C RF SHIELD 0.514"X0.552" SNAP FIT 7,985 $0.6300 In Stock
BMI-S-210-C RF SHIELD 1.201"X1.732" SNAP FIT 2,862 $1.7700 In Stock
BMI-S-206-C RF SHIELD 1.344"X1.468" SNAP FIT 2,066 $2.4600 In Stock
BMI-S-207-C RF SHIELD 1.765"X1.765" SNAP FIT 1,325 $3.9200 In Stock
BMI-S-226-C RF SHIELD SNAP FIT 1,463 $3.5373 In Stock
BMI-S-204-C RF SHIELD 1.278"X1.278" SNAP FIT 2,205 $2.3200 In Stock
BMI-C-006 CONTACT BECU 2.9X1.5MM 7,174 $0.7000 In Stock
BMI-C-002 CONTACT RETAINER FOR BOARDSHIELD 3,131 $1.6200 In Stock
BMI-C-007-01 CONTACT BECU 3.3X1.0MM 7,737 $0.6500 In Stock
+ 9 more variants in stock — browse the full category

Technical Parameters

BMI-S-209-C Specifications

Series SMT 2 Piece
Package Bulk
Part Status Active
Type Cover
Height - Overall 0.276" (7.00mm)
Length - Overall 1.156" (29.36mm)
Width - Overall 0.728" (18.50mm)
Ventilation Vented
Mounting Type Snap Fit

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need BMI-S-209-C or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.