BMI-S-202-F Laird - Performance Materials component image

BMI-S-202-F

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

RF SHIELD 0.65" X 0.65" SOLDER

Listed in RF Shields

3,249 pcs in stock ships same day before 6pm

from $0.7831

Quantity Unit Price
1 - 699 $1.5600
700 - 1,399 $1.1187
1,400 - 2,099 $0.8832
2,100 - 4,899 $0.8243
4,900+ $0.7831 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BMI-S-202-F?

BMI-S-202-F is a rf shield 0.65" x 0.65" solder, featuring the Tape & Reel (TR)Cut Tape (CT)Digi-Reel® package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Technical Parameters

BMI-S-202-F Specifications

Series SMT 2 Piece
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type Frame
Height - Overall 0.142" (3.60mm)
Length - Overall 0.650" (16.50mm)
Width - Overall 0.650" (16.50mm)
Ventilation -
Mounting Type Solder

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need BMI-S-202-F or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.