B20J7R5E Ohmite component image

B20J7R5E

In Stock

Ohmite logo Ohmite · franchised distributor

20W 7.5 OHMS VIT 5%

Listed in Through Hole Resistors

2,399 pcs in stock ships same day before 6pm

from $2.1236

Quantity Unit Price
1+ $2.1236 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the B20J7R5E?

B20J7R5E is a 20w 7.5 ohms vit 5%, featuring a power rating of 20W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
203PA5K000T 5K OHMS 0.25W 0.01% 510 $10.6321 In Stock
205A20K00Z 20K OHMS 0.33W 0.005% 588 $9.2129 In Stock
207A33K94F 33940 OHMS 0.50W 1% 472 $11.4946 In Stock
203A20R00F 20 OHMS 0.25W 1% 616 $8.6047 In Stock
205A200K0Z 200K OHMS 0.33W 0.005% 273 $20.5200 In Stock
203MA154K0A 154K OHMS 0.25W 0.05% 652 $8.0700 In Stock
203A1K000F 1K OHMS 0.25W 1% 611 $8.8717 In Stock
203MPA20K00A 20K OHMS 0.25W 0.05% 570 $9.3600 In Stock
207A551R0F 551 OHMS 0.50W 1% 491 $10.8408 In Stock
B20J70KE 20 WATT BRN DEV RESISTOR 5% 2,832 $1.7960 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

B20J7R5E Specifications

Series B20
Package Bulk
Part Status Active
Resistance 7.5 Ohms
Tolerance ±5%
Power (Watts) 20W
Composition Wirewound
Features Flame Retardant Coating, Safety
Temperature Coefficient ±260ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.437" Dia x 2.000" L (11.11mm x 50.80mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
B12J7R5E RES 7.5 OHM 12W 5% AXIAL 759 $6.9100 75%
B12J7R5 RES 7.5 OHM 5% 12W AXIAL 1,211 $4.2720 75%
B5J7R5E RES 7.5 OHM 5% 5.25W AXIAL 1,200 $4.3400 67%
B8J7R5 RES 7.5 OHM 5% 8W AXIAL 2,533 RFQ 67%
B5J7R5 RES 7.5 OHM 5% 5.25W AXIAL 4,502 RFQ 67%
B8J7R5E RES 7.5 OHM 8W 5% AXIAL 1,307 $3.9600 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need B20J7R5E or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.